Issue Date | Title | Author(s) |
2020-01-01 | A flexible hair-like laser induced graphitic sensor for low flow rate sensing applications | Abbasnejad, B; McGloin, D; Clemon, L |
2022-01-01 | A Reeb Graph Approach for Faster 3D Printing | Khatkar, J; Clemon, L; Fitch, R; Mettu, R |
2021-09-30 | Additive manufacturing opportunities for Australia’s agriculture, fisheries and forestry sectors | Clemon, L; Guertler, M; Tomidei, L; Edwards, R |
2022-01-01 | BENEFIT OF OPTIMAL ACTUATOR SELECTION - A COMPARATIVE STUDY | Hanna, P; Carmichael, M; Clemon, L |
2022-01-01 | Coordinated Toolpath Planning for Multi-Extruder Additive Manufacturing | Khatkar, J; Yool, C; Fitch, R; Clemon, L; Mettu, R |
2021-01-01 | Development of an Organisational Framework for the Optimal and Efficient Selection of Actuators | Hanna, P; Carmichael, M; Clemon, L |
2019-08-14 | DIMENSIONAL COMPARISON OF A COLD SPRAY ADDITIVE MANUFACTURING SIMULATION TOOL | Murray, R; Foy, G; Clemon, L |
2021-07-16 | Directed Graphical Model for Real-Time Process Monitoring in Additive Manufacturing | Clemon, L |
2020-11-16 | Directed Graphical Model for Real-Time Process Monitoring in Additive Manufacturing | Clemon, L |
2016-08-10 | Energy and Emission Estimation Uncertainty in Fused Deposition Modeling for a Job-Shop | Clemon, L; Bourell, D; Crawford, R; Seepersad, C; Beaman, J; Fish, S; Marcus, H |
2021-01-01 | Increased Strength of 3D Printed Parts With Z-Pin Approach | Clemon, L; Christopher, K |
2021-01-01 | INFLUENCING THE MECHANICAL PROPERTIES OF FUSED FILAMENT FABRICATION PARTS BY NON-PLANAR MATERIAL EXTRUSION | Edwards, R; Clemon, L |
2017-04-01 | Process-Structure-Property Relationships for 316L Stainless Steel Fabricated by Additive Manufacturing and Its Implication for Component Engineering | Yang, N; Yee, J; Zheng, B; Gaiser, K; Reynolds, T; Clemon, L; Lu, WY; Schoenung, JM; Lavernia, EJ |
2022-01-01 | Production Flow Analysis in the Era of Industry 4.0 : How Digital Technologies can Support Decision-Making in the Factory of the Future | Tomidei, L; Sick, N; Deuse, J; Clemon, L |
2022-01-01 | TOOLPATH PLANNING WITH THERMAL STRESS AWARENESS FOR MATERIAL EXTRUSION ADDITIVE MANUFACTURING | Khatkar, J; Clemon, L; Mettu, R |
2019-06-01 | Uncertainty and Variability of Energy and Material Use by Fused Deposition Modeling Printers in Makerspaces | Song, R; Clemon, L; Telenko, C |
2022-01-01 | Woolshed Throughput Improvement Using Discrete Event Simulation | Al-Zqebah, R; Hoffmann, F; Bennett, N; Deuse, J; Clemon, L |