Three-dimensional electron energy deposition modeling of cathodoluminescence emission near threading dislocations in gan and electron-beam lithography exposure parameters for a PMMA resist
- Publication Type:
- Journal Article
- Citation:
- Microscopy and Microanalysis, 2012, 18 (6), pp. 1220 - 1228
- Issue Date:
- 2012-12-01
Closed Access
Filename | Description | Size | |||
---|---|---|---|---|---|
2012001463OK.pdf | 507.13 kB |
Copyright Clearance Process
- Recently Added
- In Progress
- Closed Access
This item is closed access and not available.
The Monte Carlo software CASINO has been expanded with new modules for the simulation of complex beam scanning patterns, for the simulation of cathodoluminescence (CL), and for the calculation of electron energy deposition in subregions of a three-dimensional (3D) volume. Two examples are presented of the application of these new capabilities of CASINO. First, the CL emission near threading dislocations in gallium nitride (GaN) was modeled. The CL emission simulation of threading dislocations in GaN demonstrated that a better signal-to-noise ratio was obtained with lower incident electron energy than with higher energy. Second, the capability to simulate the distribution of the deposited energy in 3D was used to determine exposure parameters for polymethylmethacrylate resist using electron-beam lithography (EBL). The energy deposition dose in the resist was compared for two different multibeam EBL schemes by changing the incident electron energy. © 2012 Microscopy Society of America.
Please use this identifier to cite or link to this item: