TY - JOUR AB - © 1986-2012 IEEE. This paper presents a detailed steady-state analysis and ac small-signal modeling of the power stage of pulse-width modulated A-source converter. The voltage and current waveforms along with their corresponding expressions describing the converter operation are presented in detail. The input-to-output and input-to-capacitor dc voltage transfer functions are determined. The minimum inductance required to ensure continuous conduction mode is derived. The expressions for the semiconductor devices stresses are also presented. The dc, averaged equivalent circuit is derived using the circuit averaging technique. A complete derivation of the small-signal model including the converter parasitic resistances are presented followed by the power stage transfer functions relevant to the capacitor voltage loop, such as: 1) duty cycle-to-capacitor voltage; and 2) input-to-capacitor voltage. In addition, the expressions for the network input impedance and output impedance are derived. Finally, experimental validations of the derived small-signal models are performed, both in frequency and time domain for a laboratory prototype of an A-source converter. The theoretical predictions were in good agreement with the experimental results over a wide range of frequencies. AU - Ayachit, A AU - Siwakoti, YP AU - Galigekere, VPN AU - Kazimierczuk, MK AU - Blaabjerg, F DA - 2018/08/01 DO - 10.1109/TPEL.2017.2756626 EP - 7131 JO - IEEE Transactions on Power Electronics PY - 2018/08/01 SP - 7118 TI - Steady-State and Small-Signal Analysis of A-Source Converter VL - 33 Y1 - 2018/08/01 Y2 - 2024/03/29 ER -