RC hovercraft: An I-Bylogical Enzyme (I-BE) biosensor carrier

Kridalukmana, R; Cahyo, BSP; Kurniawan, DW; Arifan, F

RC hovercraft: An I-Bylogical Enzyme (I-BE) biosensor carrier

Kridalukmana, R

Cahyo, BSP Kurniawan, DW Arifan, F

Permalink

Publication Type:: Journal Article
Citation:: International Journal of Electrical and Computer Engineering, 2017, 7 (4), pp. 2002 - 2007
Issue Date:: 2017-01-01

Open Access

Copyright Clearance Process

Recently Added
In Progress
Open Access

This item is open access.

Adobe PDF

Download Published VersionAdobe PDF (242.72 kB)

View on publisher's site

View statistics

Full metadata record

Field	Value	Language
dc.contributor.author	Kridalukmana, R https://orcid.org/0000-0003-3797-0134	en_US
dc.contributor.author	Cahyo, BSP	en_US
dc.contributor.author	Kurniawan, DW	en_US
dc.contributor.author	Arifan, F	en_US
dc.date.issued	2017-01-01	en_US
dc.identifier.citation	International Journal of Electrical and Computer Engineering, 2017, 7 (4), pp. 2002 - 2007	en_US
dc.identifier.issn	2088-8708	en_US
dc.identifier.uri	http://hdl.handle.net/10453/125875
dc.description.abstract	Copyright © 2017 Institute of Advanced Engineering and Science. All rights reserved. In this research, a hovercraft was developed as a transportation tool to carry an I-Bylogical Enzyme (I-BE) biosensor. The main function of the biosensor is to measure the level of dangerous chemical materials from factory's liquid waste. Hence, fiber and acrylic materials, that widely known for its resistance to chemical reaction, are needed to build the hovercraft. By using Atmega 8535 microcontroller and Arduino Uno board, a remote control was choosen to navigate hovercraft's movement with support of 6 channels Transmitter Receiver. As a result, after series of tests that were carried out, indicate that the hovercraft's prototype was found to meet design and requirements expectation	en_US
dc.relation.ispartof	International Journal of Electrical and Computer Engineering	en_US
dc.relation.isbasedon	10.11591/ijece.v7i4.pp2002-2007	en_US
dc.title	RC hovercraft: An I-Bylogical Enzyme (I-BE) biosensor carrier	en_US
dc.type	Journal Article
utslib.citation.volume	4	en_US
utslib.citation.volume	7	en_US
utslib.for	0306 Physical Chemistry (incl. Structural)	en_US
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Students
utslib.copyright.status	open_access
pubs.issue	4	en_US
pubs.publication-status	Published	en_US
pubs.volume	7	en_US

Abstract:

Copyright © 2017 Institute of Advanced Engineering and Science. All rights reserved. In this research, a hovercraft was developed as a transportation tool to carry an I-Bylogical Enzyme (I-BE) biosensor. The main function of the biosensor is to measure the level of dangerous chemical materials from factory's liquid waste. Hence, fiber and acrylic materials, that widely known for its resistance to chemical reaction, are needed to build the hovercraft. By using Atmega 8535 microcontroller and Arduino Uno board, a remote control was choosen to navigate hovercraft's movement with support of 6 channels Transmitter Receiver. As a result, after series of tests that were carried out, indicate that the hovercraft's prototype was found to meet design and requirements expectation

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/125875