Short- and open-stub loaded spiral resonator and its application in planar microstrip filters

Xu, KD; Xu, H; Liu, Y; Ai, J; Liu, QH

Short- and open-stub loaded spiral resonator and its application in planar microstrip filters

Xu, KD Xu, H Liu, Y

Ai, J Liu, QH

Permalink

Publication Type:: Journal Article
Citation:: IET Microwaves, Antennas and Propagation, 2017, 11 (3), pp. 363 - 369
Issue Date:: 2017-01-01

Closed Access

	Filename	Description	Size
	Short- and open-stub loaded spiral resonator and its application in planar microstrip filters.pdf	Published Version	4.05 MB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Xu, KD	en_US
dc.contributor.author	Xu, H	en_US
dc.contributor.author	Liu, Y https://orcid.org/0000-0001-5466-0184	en_US
dc.contributor.author	Ai, J	en_US
dc.contributor.author	Liu, QH	en_US
dc.date.issued	2017-01-01	en_US
dc.identifier.citation	IET Microwaves, Antennas and Propagation, 2017, 11 (3), pp. 363 - 369	en_US
dc.identifier.issn	1751-8725	en_US
dc.identifier.uri	http://hdl.handle.net/10453/126849
dc.description.abstract	© The Institution of Engineering and Technology. A novel short- and open-stub loaded spiral resonator (SOSL-SR) is presented and analysed by the odd- and even-mode method to obtain three controllable resonant modes. Therefore, a triple-mode bandpass filter (BPF) has been designed with good frequency selectivity based on the proposed SOSL-SR. Then, by dividing these three resonant modes into two passbands or stopbands, a dual-band BPF and a dual-band bandstop filter using the proposed SOSL-SR have been demonstrated. Because of the spiral structure, the sizes of these three designed microstrip filters are reduced significantly. Good agreement between simulated and measured results validates the design concept.	en_US
dc.relation.ispartof	IET Microwaves, Antennas and Propagation	en_US
dc.relation.isbasedon	10.1049/iet-map.2016.0253	en_US
dc.subject.classification	Networking & Telecommunications	en_US
dc.title	Short- and open-stub loaded spiral resonator and its application in planar microstrip filters	en_US
dc.type	Journal Article
utslib.citation.volume	3	en_US
utslib.citation.volume	11	en_US
utslib.for	0906 Electrical and Electronic Engineering	en_US
utslib.for	1005 Communications Technologies	en_US
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
pubs.organisational-group	/University of Technology Sydney/Strength - GBDTC - Global Big Data Technologies
utslib.copyright.status	closed_access
pubs.issue	3	en_US
pubs.publication-status	Published	en_US
pubs.volume	11	en_US

Abstract:

© The Institution of Engineering and Technology. A novel short- and open-stub loaded spiral resonator (SOSL-SR) is presented and analysed by the odd- and even-mode method to obtain three controllable resonant modes. Therefore, a triple-mode bandpass filter (BPF) has been designed with good frequency selectivity based on the proposed SOSL-SR. Then, by dividing these three resonant modes into two passbands or stopbands, a dual-band BPF and a dual-band bandstop filter using the proposed SOSL-SR have been demonstrated. Because of the spiral structure, the sizes of these three designed microstrip filters are reduced significantly. Good agreement between simulated and measured results validates the design concept.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/126849