Compact Dual-Polarized Printed Slot Antenna

Li, W; Zeng, Z; You, B; Ye, L; Liu, Y; Liu, QH

Compact Dual-Polarized Printed Slot Antenna

Li, W Zeng, Z You, B Ye, L Liu, Y

Liu, QH

Permalink

Publication Type:: Journal Article
Citation:: IEEE Antennas and Wireless Propagation Letters, 2017, 16 pp. 2816 - 2819
Issue Date:: 2017-09-01

Closed Access

	Filename	Description	Size
	08025386.pdf	Published Version	546.46 kB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Li, W	en_US
dc.contributor.author	Zeng, Z	en_US
dc.contributor.author	You, B	en_US
dc.contributor.author	Ye, L	en_US
dc.contributor.author	Liu, Y https://orcid.org/0000-0001-5466-0184	en_US
dc.contributor.author	Liu, QH	en_US
dc.date.issued	2017-09-01	en_US
dc.identifier.citation	IEEE Antennas and Wireless Propagation Letters, 2017, 16 pp. 2816 - 2819	en_US
dc.identifier.issn	1536-1225	en_US
dc.identifier.uri	http://hdl.handle.net/10453/126908
dc.description.abstract	© 2002-2011 IEEE. A dual-polarized printed slot antenna is constructed by inserting the open-end slot into the coplanar waveguide center conductor of T-shaped slot. In order to verify the antenna performance, an antenna prototype was fabricated. The experimental results show that its working bandwidth is about 10.5%. In the operating frequency band, the isolation between two ports is higher than 27 dB. The proposed two-port antenna has bidirectional radiation characteristics, but the gain of the T-shaped slot element is higher than that of the open-end slot element. In the maximum radiation direction, the copolarization level of the T-shaped slot is 39 dB higher than the cross polarization and 30 dB for the open-end slot. The proposed dual-polarized antenna has a compact structure.	en_US
dc.relation.ispartof	IEEE Antennas and Wireless Propagation Letters	en_US
dc.relation.isbasedon	10.1109/LAWP.2017.2748542	en_US
dc.rights	info:eu-repo/semantics/closedAccess
dc.subject.classification	Networking & Telecommunications	en_US
dc.title	Compact Dual-Polarized Printed Slot Antenna	en_US
dc.type	Journal Article
utslib.citation.volume	16	en_US
utslib.for	0906 Electrical and Electronic Engineering	en_US
utslib.for	1005 Communications Technologies	en_US
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
pubs.organisational-group	/University of Technology Sydney/Strength - GBDTC - Global Big Data Technologies
utslib.copyright.status	closed_access	*
pubs.publication-status	Published	en_US
pubs.volume	16	en_US

Abstract:

© 2002-2011 IEEE. A dual-polarized printed slot antenna is constructed by inserting the open-end slot into the coplanar waveguide center conductor of T-shaped slot. In order to verify the antenna performance, an antenna prototype was fabricated. The experimental results show that its working bandwidth is about 10.5%. In the operating frequency band, the isolation between two ports is higher than 27 dB. The proposed two-port antenna has bidirectional radiation characteristics, but the gain of the T-shaped slot element is higher than that of the open-end slot element. In the maximum radiation direction, the copolarization level of the T-shaped slot is 39 dB higher than the cross polarization and 30 dB for the open-end slot. The proposed dual-polarized antenna has a compact structure.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/126908