Direct torque control with a modified switching table for a direct matrix converter based AC motor drive system
- Publication Type:
- Conference Proceeding
- 2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017, 2017
- Issue Date:
|ICEMS2017_DTC_MC full paper FORMATTED Jianwei_Li_DGD_no_logo.pdf||Accepted manuscript||1.88 MB|
Copyright Clearance Process
- Recently Added
- In Progress
- Open Access
This item is currently unavailable due to the publisher's embargo.
The embargo period expires on 31 Oct 2019
© 2017 IEEE. The direct matrix converter has been regarded as a promising AC/AC conversion topology and it is being researched. Motor drives are one of the main potential applications of the matrix converter. This paper carries forward the application of matrix converters in AC motor drives using direct torque control (DTC). In the common DTC scheme for the matrix converter, two vectors with the maximum amplitudes are used to control the torque and flux. In the proposed approach, the input voltage vector sectors are redefined, therefore a modified and simplified switching look-up table is obtained. In this case the most appropriate vector to be applied is uniquely determined and the number of switch actions are reduced. The excellent dynamic performance is obtained by selecting the maximum vector. Flux and speed are controlled effectively. Simulation work is carried out for an induction motor and results verify the effectiveness of the proposed DTC control in matrix converter based AC drive systems.
Please use this identifier to cite or link to this item: