The High Frequency Magnetic-Link with Distributed HTS YBCO Windings for Power Converter Applications

Kiran, MR; Farrok, O; Islam, MR; Zhu, J; Kouzani, AZ; Mahmud, MAP

The High Frequency Magnetic-Link with Distributed HTS YBCO Windings for Power Converter Applications

Kiran, MR Farrok, O Islam, MR Zhu, J

Kouzani, AZ Mahmud, MAP

Permalink

Publisher:: Institute of Electrical and Electronics Engineers
Publication Type:: Journal Article
Citation:: IEEE Transactions on Applied Superconductivity, 2021, 31, (8), pp. 1-5
Issue Date:: 2021-11-01

Closed Access

	Filename	Description	Size
	The_High_Frequency_Magnetic-Link_With_Distributed_HTS_YBCO_Windings_for_Power_Converter_Applications.pdf		2.51 MB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Kiran, MR
dc.contributor.author	Farrok, O
dc.contributor.author	Islam, MR
dc.contributor.author	Zhu, J https://orcid.org/0000-0002-9763-4047
dc.contributor.author	Kouzani, AZ
dc.contributor.author	Mahmud, MAP
dc.date.accessioned	2022-05-30T06:09:08Z
dc.date.available	2022-05-30T06:09:08Z
dc.date.issued	2021-11-01
dc.identifier.citation	IEEE Transactions on Applied Superconductivity, 2021, 31, (8), pp. 1-5
dc.identifier.issn	1051-8223
dc.identifier.issn	1558-2515
dc.identifier.uri	http://hdl.handle.net/10453/157825
dc.description.abstract	High frequency magnetic-link (HFML) is widely used in medium/high voltage power electronic converters for various applications. In this paper, a 440 V, 100 kHz compact HFML is designed with ANSYS/Maxwell software environment where the amorphous material is used as the magnetic core. The HFML is analyzed with solid toroidal cores with various winding configurations. A comparison of the HFML is performed for both the conventional copper winding and superconducting winding. Yttrium barium copper oxide material-based superconductor tape is applied to obtain the maximum power of the HFML. In addition, suitable winding configuration is selected to ensure possible maximum electrical power transfer while minimizing the magnetic saturation in the core. Simulation results show the electrical parameters of the HFML along with its magnetic flux density and power. The proposed HFML design with distributed winding is validated experimentally with a small-scale prototype where it is found that the maximum power transfer capability is increased more than 48% than that of the conventional one.
dc.language	English
dc.publisher	Institute of Electrical and Electronics Engineers
dc.relation.ispartof	IEEE Transactions on Applied Superconductivity
dc.relation.isbasedon	10.1109/TASC.2021.3103721
dc.rights	info:eu-repo/semantics/closedAccess
dc.subject	0204 Condensed Matter Physics, 0906 Electrical and Electronic Engineering, 0912 Materials Engineering
dc.subject.classification	General Physics
dc.title	The High Frequency Magnetic-Link with Distributed HTS YBCO Windings for Power Converter Applications
dc.type	Journal Article
utslib.citation.volume	31
utslib.for	0204 Condensed Matter Physics
utslib.for	0906 Electrical and Electronic Engineering
utslib.for	0912 Materials Engineering
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Strength - CCET - Centre for Clean Energy Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
utslib.copyright.status	closed_access	*
pubs.consider-herdc	false
dc.date.updated	2022-05-30T06:09:06Z
pubs.issue	8
pubs.publication-status	Published
pubs.volume	31
utslib.citation.issue	8

Abstract:

High frequency magnetic-link (HFML) is widely used in medium/high voltage power electronic converters for various applications. In this paper, a 440 V, 100 kHz compact HFML is designed with ANSYS/Maxwell software environment where the amorphous material is used as the magnetic core. The HFML is analyzed with solid toroidal cores with various winding configurations. A comparison of the HFML is performed for both the conventional copper winding and superconducting winding. Yttrium barium copper oxide material-based superconductor tape is applied to obtain the maximum power of the HFML. In addition, suitable winding configuration is selected to ensure possible maximum electrical power transfer while minimizing the magnetic saturation in the core. Simulation results show the electrical parameters of the HFML along with its magnetic flux density and power. The proposed HFML design with distributed winding is validated experimentally with a small-scale prototype where it is found that the maximum power transfer capability is increased more than 48% than that of the conventional one.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/157825