Study on surface roughness transformation during metal rolling

Almotairy, S; Wei, D; Jiang, Z

Study on surface roughness transformation during metal rolling

Almotairy, S Wei, D

Jiang, Z

Permalink

Publication Type:: Journal Article
Citation:: Advanced Materials Research, 2012, 418-420 pp. 897 - 902
Issue Date:: 2012-03-14

Closed Access

	Filename	Description	Size
	2013003160OK.pdf	Published version	458.95 kB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Almotairy, S	en_US
dc.contributor.author	Wei, D https://orcid.org/0000-0002-4247-8905	en_US
dc.contributor.author	Jiang, Z	en_US
dc.date.issued	2012-03-14	en_US
dc.identifier.citation	Advanced Materials Research, 2012, 418-420 pp. 897 - 902	en_US
dc.identifier.isbn	9783037853269	en_US
dc.identifier.issn	1022-6680	en_US
dc.identifier.uri	http://hdl.handle.net/10453/32072
dc.description.abstract	Increasing the demand for cold rolled ultra thin strip as feedstock for miniaturized products has encouraged researchers to investigate the ways to increase the quality of such products, especially those related to strip surface roughness. Surface is known as quality factor in most of manufacturing processes. In this paper, the effect of the rolling parameters on the surface roughness transformation during metal rolling has been studied. The experimental results demonstrate that the surface roughness transformation during metal rolling is highly affected by the designation of the processing parameters such as finishing temperature, reduction, rolling passes and lubrication. The results have been discussed to verify the validity of the new findings. © (2012) Trans Tech Publications, Switzerland.	en_US
dc.relation.ispartof	Advanced Materials Research	en_US
dc.relation.isbasedon	10.4028/www.scientific.net/AMR.418-420.897	en_US
dc.title	Study on surface roughness transformation during metal rolling	en_US
dc.type	Journal Article
utslib.citation.volume	418-420	en_US
utslib.for	0910 Manufacturing Engineering	en_US
utslib.for	09 Engineering	en_US
dc.location.activity	Guillin, PEOPLES R CHINA
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Mechanical and Mechatronic Engineering
utslib.copyright.status	closed_access
pubs.publication-status	Published	en_US
pubs.volume	418-420	en_US

Abstract:

Increasing the demand for cold rolled ultra thin strip as feedstock for miniaturized products has encouraged researchers to investigate the ways to increase the quality of such products, especially those related to strip surface roughness. Surface is known as quality factor in most of manufacturing processes. In this paper, the effect of the rolling parameters on the surface roughness transformation during metal rolling has been studied. The experimental results demonstrate that the surface roughness transformation during metal rolling is highly affected by the designation of the processing parameters such as finishing temperature, reduction, rolling passes and lubrication. The results have been discussed to verify the validity of the new findings. © (2012) Trans Tech Publications, Switzerland.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/32072