The influence of enamel firing process on microstructure and mechanical properties of steel substrate

Zhang, AW; Jiao, SH; Jiang, ZY; Sun, QS; Wei, DB

The influence of enamel firing process on microstructure and mechanical properties of steel substrate

Zhang, AW Jiao, SH Jiang, ZY Sun, QS Wei, DB

Permalink

Publication Type:: Journal Article
Citation:: Advanced Materials Research, 2011, 194-196 pp. 144 - 149
Issue Date:: 2011-03-17

Closed Access

	Filename	Description	Size
	2013003165OK.pdf	Published version	746.42 kB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Zhang, AW	en_US
dc.contributor.author	Jiao, SH	en_US
dc.contributor.author	Jiang, ZY	en_US
dc.contributor.author	Sun, QS	en_US
dc.contributor.author	Wei, DB https://orcid.org/0000-0002-4247-8905	en_US
dc.date.issued	2011-03-17	en_US
dc.identifier.citation	Advanced Materials Research, 2011, 194-196 pp. 144 - 149	en_US
dc.identifier.isbn	9783037850336	en_US
dc.identifier.issn	1022-6680	en_US
dc.identifier.uri	http://hdl.handle.net/10453/32077
dc.description.abstract	The as-rolled and enamel fired microstructure and mechanical properties of two low carbon steels with different compositions were analysed in the paper. The results show that the grains do not coarsen in lab firing process, and could be refined after industrial enamel firing process. The strength can keep stable in the firing process and the impact energy could be enhanced greatly under the industrial enamel firing process. The surface decarburized layer was occurred as a result of chemical reaction among the carbon in steel and water, oxides in the enamel frit. © (2011) Trans Tech Publications.	en_US
dc.relation.ispartof	Advanced Materials Research	en_US
dc.relation.isbasedon	10.4028/www.scientific.net/AMR.194-196.144	en_US
dc.title	The influence of enamel firing process on microstructure and mechanical properties of steel substrate	en_US
dc.type	Journal Article
utslib.citation.volume	194-196	en_US
utslib.for	0910 Manufacturing Engineering	en_US
utslib.for	09 Engineering	en_US
dc.location.activity	Guilin, PEOPLES R CHINA
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Mechanical and Mechatronic Engineering
utslib.copyright.status	closed_access
pubs.publication-status	Published	en_US
pubs.volume	194-196	en_US

Abstract:

The as-rolled and enamel fired microstructure and mechanical properties of two low carbon steels with different compositions were analysed in the paper. The results show that the grains do not coarsen in lab firing process, and could be refined after industrial enamel firing process. The strength can keep stable in the firing process and the impact energy could be enhanced greatly under the industrial enamel firing process. The surface decarburized layer was occurred as a result of chemical reaction among the carbon in steel and water, oxides in the enamel frit. © (2011) Trans Tech Publications.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/32077