Microstrip lowpass filter based on split ring and complementary split ring resonators

Yang, Y; Zhu, X; Karmakar, NC

Microstrip lowpass filter based on split ring and complementary split ring resonators

Yang, Y

Zhu, X

Karmakar, NC

Permalink

Publication Type:: Journal Article
Citation:: Microwave and Optical Technology Letters, 2012, 54 (7), pp. 1723 - 1726
Issue Date:: 2012-07-01

Closed Access

	Filename	Description	Size
	Yang_et_al-2012-Microwave_and_Optical_Technology_Letters (2).pdf	Published Version	1.1 MB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Yang, Y https://orcid.org/0000-0001-7439-2156	en_US
dc.contributor.author	Zhu, X https://orcid.org/0000-0002-5814-394X	en_US
dc.contributor.author	Karmakar, NC	en_US
dc.date.issued	2012-07-01	en_US
dc.identifier.citation	Microwave and Optical Technology Letters, 2012, 54 (7), pp. 1723 - 1726	en_US
dc.identifier.issn	0895-2477	en_US
dc.identifier.uri	http://hdl.handle.net/10453/117516
dc.description.abstract	A novel split ring and complementary split ring resonator is proposed in this letter.The proposed resonator can generate two notches without increasing the physical size. A microstrip lowpass filter (LPF) is designed based on the proposed resonator. The cutoff frequency of the designed LPF is 3.7 GHz and the stopband with an attenuation level lower than -20 dB is obtained from 3.9 to 7.5 GHz. The selectivity is calculated to be 85 dB/GHz. The physical size of the LPF with transmission lines is 29 × 6 mm 2. A good agreement between simulated and measured results is achieved. © 2012 Wiley Periodicals, Inc.	en_US
dc.relation.ispartof	Microwave and Optical Technology Letters	en_US
dc.relation.isbasedon	10.1002/mop.26887	en_US
dc.rights	info:eu-repo/semantics/closedAccess
dc.subject.classification	Networking & Telecommunications	en_US
dc.title	Microstrip lowpass filter based on split ring and complementary split ring resonators	en_US
dc.type	Journal Article
utslib.citation.volume	7	en_US
utslib.citation.volume	54	en_US
utslib.for	0906 Electrical and Electronic Engineering	en_US
utslib.for	0205 Optical Physics	en_US
utslib.for	1005 Communications Technologies	en_US
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
pubs.organisational-group	/University of Technology Sydney/Strength - GBDTC - Global Big Data Technologies
utslib.copyright.status	closed_access	*
pubs.issue	7	en_US
pubs.publication-status	Published	en_US
pubs.volume	54	en_US

Abstract:

A novel split ring and complementary split ring resonator is proposed in this letter.The proposed resonator can generate two notches without increasing the physical size. A microstrip lowpass filter (LPF) is designed based on the proposed resonator. The cutoff frequency of the designed LPF is 3.7 GHz and the stopband with an attenuation level lower than -20 dB is obtained from 3.9 to 7.5 GHz. The selectivity is calculated to be 85 dB/GHz. The physical size of the LPF with transmission lines is 29 × 6 mm 2. A good agreement between simulated and measured results is achieved. © 2012 Wiley Periodicals, Inc.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/117516