Wideband Pattern-Reconfigurable Antenna with Switchable Broadside and Conical Beams

Publication Type:
Journal Article
IEEE Antennas and Wireless Propagation Letters, 2017, 16 pp. 2638 - 2641
Issue Date:
Full metadata record
© 2017 IEEE. A wideband, pattern-reconfigurable antenna is reported that is, for example, a good candidate for ceiling-mounted indoor wireless systems. Switchable linearly polarized broadside and conical radiation patterns are achieved by systematically integrating a wideband low-profile monopolar patch antenna with a wideband L-probe fed patch antenna. The monopolar patch acts as the ground for the L-probe fed patch, which is fed with a coaxial cable that replaces one shorting via of the monopolar patch to avoid deterioration of the conical-beam pattern. A simple switching feed network facilitates the pattern reconfigurability. A prototype was fabricated and tested. The measured results confirm the predicted wideband radiation performance. The operational impedance bandwidth, i.e., S 11 ≤-10 dB, is obtained as the overlap of the bands associated with both pattern modalities. It is wide, from 2.25 to 2.85 GHz (23.5%). Switchable broadside and conical radiation patterns are observed across this entire operating bandwidth. The peak measured gain was 8.2 dBi for the broadside mode and 6.9 dBi for the conical mode. The overall profile of this antenna is 0.13λ 0 at its lowest operating frequency.
Please use this identifier to cite or link to this item: