A microstrip dual-band polarization reconfigurable antenna

Qin, PY; Guo, YJ; Ding, C

A microstrip dual-band polarization reconfigurable antenna

Qin, PY

Guo, YJ

Ding, C

Permalink

Publication Type:: Conference Proceeding
Citation:: IEEE Antennas and Propagation Society, AP-S International Symposium (Digest), 2013, pp. 1640 - 1641
Issue Date:: 2013-12-01

Closed Access

	Filename	Description	Size
	06711479.pdf	Published version	351.65 kB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Qin, PY https://orcid.org/0000-0001-8861-4143	en_US
dc.contributor.author	Guo, YJ https://orcid.org/0000-0001-6008-9682	en_US
dc.contributor.author	Ding, C https://orcid.org/0000-0002-2629-1657	en_US
dc.date.issued	2013-12-01	en_US
dc.identifier.citation	IEEE Antennas and Propagation Society, AP-S International Symposium (Digest), 2013, pp. 1640 - 1641	en_US
dc.identifier.isbn	9781467353175	en_US
dc.identifier.issn	1522-3965	en_US
dc.identifier.uri	http://hdl.handle.net/10453/120102
dc.description.abstract	A new microstrip dual-band polarization reconfigurable antenna is presented for WLANs operating at 2.4 GHz and 5.8 GHz The antenna consists of a square microstrip patch that is aperture coupled to a microstrip line located along the diagonal line of the patch. The dual-band operation is realized by employing the TM10 and TM30 modes of the patch antenna. Four shorting posts are inserted into the patch to adjust the frequency ratio of the two modes. The center of each edge of the patch is connected to ground via a PIN diode for polarization switching. By switching between the different states of PIN diodes, the proposed antenna can have horizontal, vertical, or 45° linear polarizations for the two frequency bands. © 2013 IEEE.	en_US
dc.relation.ispartof	IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)	en_US
dc.relation.isbasedon	10.1109/APS.2013.6711479	en_US
dc.rights	info:eu-repo/semantics/closedAccess
dc.title	A microstrip dual-band polarization reconfigurable antenna	en_US
dc.type	Conference Proceeding
utslib.for	0906 Electrical and Electronic Engineering	en_US
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
pubs.organisational-group	/University of Technology Sydney/Strength - GBDTC - Global Big Data Technologies
utslib.copyright.status	closed_access	*
pubs.publication-status	Published	en_US

Abstract:

A new microstrip dual-band polarization reconfigurable antenna is presented for WLANs operating at 2.4 GHz and 5.8 GHz The antenna consists of a square microstrip patch that is aperture coupled to a microstrip line located along the diagonal line of the patch. The dual-band operation is realized by employing the TM10 and TM30 modes of the patch antenna. Four shorting posts are inserted into the patch to adjust the frequency ratio of the two modes. The center of each edge of the patch is connected to ground via a PIN diode for polarization switching. By switching between the different states of PIN diodes, the proposed antenna can have horizontal, vertical, or 45° linear polarizations for the two frequency bands. © 2013 IEEE.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/120102