Design of a non-isolated single-switch three-port DC-DC converter for standalone PV-battery power system

Zhao, J; Iu, HHC; Fernando, T; An, L; Dah-Chuan Lu, D

Design of a non-isolated single-switch three-port DC-DC converter for standalone PV-battery power system

Zhao, J Iu, HHC Fernando, T An, L Dah-Chuan Lu, D

Permalink

Publication Type:: Conference Proceeding
Citation:: Proceedings - IEEE International Symposium on Circuits and Systems, 2015, 2015-July pp. 2493 - 2496
Issue Date:: 2015-01-01

Closed Access

	Filename	Description	Size
	de.pdf	Published version	727.35 kB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Zhao, J	en_US
dc.contributor.author	Iu, HHC	en_US
dc.contributor.author	Fernando, T	en_US
dc.contributor.author	An, L	en_US
dc.contributor.author	Dah-Chuan Lu, D https://orcid.org/0000-0003-2145-0580	en_US
dc.date.issued	2015-01-01	en_US
dc.identifier.citation	Proceedings - IEEE International Symposium on Circuits and Systems, 2015, 2015-July pp. 2493 - 2496	en_US
dc.identifier.isbn	9781479983919	en_US
dc.identifier.issn	0271-4310	en_US
dc.identifier.uri	http://hdl.handle.net/10453/120106
dc.description.abstract	© 2015 IEEE. This paper proposes a design of a single-switch non-isolated three-port converter for a standalone photovoltaic (PV) power system with energy storage. The three-port converter is obtained by combining the switches of two conventional cascaded DC-DC converters. Pulse-width modulation (PWM) and pulse-frequency modulation (PFM) are utilized to regulate the two converters respectively. The proposed design reduces the components and the size of the converter and maximizes the number of control variables. Then, the topology of the proposed converter is analyzed with its operation modes. Finally, simulation and experimental results are given to verify the proposed design.	en_US
dc.relation.ispartof	Proceedings - IEEE International Symposium on Circuits and Systems	en_US
dc.relation.isbasedon	10.1109/ISCAS.2015.7169191	en_US
dc.rights	info:eu-repo/semantics/closedAccess
dc.title	Design of a non-isolated single-switch three-port DC-DC converter for standalone PV-battery power system	en_US
dc.type	Conference Proceeding
utslib.citation.volume	2015-July	en_US
utslib.for	0906 Electrical and Electronic Engineering	en_US
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
utslib.copyright.status	closed_access	*
pubs.publication-status	Published	en_US
pubs.volume	2015-July	en_US

Abstract:

© 2015 IEEE. This paper proposes a design of a single-switch non-isolated three-port converter for a standalone photovoltaic (PV) power system with energy storage. The three-port converter is obtained by combining the switches of two conventional cascaded DC-DC converters. Pulse-width modulation (PWM) and pulse-frequency modulation (PFM) are utilized to regulate the two converters respectively. The proposed design reduces the components and the size of the converter and maximizes the number of control variables. Then, the topology of the proposed converter is analyzed with its operation modes. Finally, simulation and experimental results are given to verify the proposed design.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/120106