Radiated EMI Modeling and Performance Analysis of a PWM PMSM Drive System Based on Field-Circuit Coupled FEM

Huangfu, Y; Wang, S; Di Rienzo, L; Zhu, J

Radiated EMI Modeling and Performance Analysis of a PWM PMSM Drive System Based on Field-Circuit Coupled FEM

Huangfu, Y Wang, S Di Rienzo, L Zhu, J

Permalink

Publication Type:: Journal Article
Citation:: IEEE Transactions on Magnetics, 2017, 53 (11)
Issue Date:: 2017-11-01

Closed Access

	Filename	Description	Size
	07930529.pdf	Published Version	1.45 MB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Huangfu, Y	en_US
dc.contributor.author	Wang, S	en_US
dc.contributor.author	Di Rienzo, L	en_US
dc.contributor.author	Zhu, J https://orcid.org/0000-0002-9763-4047	en_US
dc.date.issued	2017-11-01	en_US
dc.identifier.citation	IEEE Transactions on Magnetics, 2017, 53 (11)	en_US
dc.identifier.issn	0018-9464	en_US
dc.identifier.uri	http://hdl.handle.net/10453/125382
dc.description.abstract	© 2017 IEEE. The radiated electromagnetic interference (EMI) behavior may have a negative impact on the machining accuracy of grinding machines. Therefore, this paper focuses on the radiated EMI generated by an ultra-precision pulsewidth modulation permanent-magnet synchronous motor (PMSM) drive system. The excitation for the radiated EMI model, the common-mode (CM) ground current at the output terminal of the converter, is obtained by simulating its conducted EMI model. The reasonable simplified FE models for the converter frame, the shielded power cable, and the motor frame are established. In addition, an equivalent circuit macro model of the CM impedance of the three-phase PMSM windings is obtained by using impedance measurements, the vector fitting method, and the fast residue perturbation method. Finally, the 3-D time harmonic field-circuit coupled finite-element method is employed to evaluate the radiated EMI.	en_US
dc.relation.ispartof	IEEE Transactions on Magnetics	en_US
dc.relation.isbasedon	10.1109/TMAG.2017.2705079	en_US
dc.rights	info:eu-repo/semantics/closedAccess
dc.subject.classification	Applied Physics	en_US
dc.title	Radiated EMI Modeling and Performance Analysis of a PWM PMSM Drive System Based on Field-Circuit Coupled FEM	en_US
dc.type	Journal Article
utslib.citation.volume	11	en_US
utslib.citation.volume	53	en_US
utslib.for	0203 Classical Physics	en_US
utslib.for	0905 Civil Engineering	en_US
utslib.for	02 Physical Sciences	en_US
utslib.for	09 Engineering	en_US
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
pubs.organisational-group	/University of Technology Sydney/Strength - CCET - Centre for Clean Energy Technology
utslib.copyright.status	closed_access	*
pubs.issue	11	en_US
pubs.publication-status	Published	en_US
pubs.volume	53	en_US

Abstract:

© 2017 IEEE. The radiated electromagnetic interference (EMI) behavior may have a negative impact on the machining accuracy of grinding machines. Therefore, this paper focuses on the radiated EMI generated by an ultra-precision pulsewidth modulation permanent-magnet synchronous motor (PMSM) drive system. The excitation for the radiated EMI model, the common-mode (CM) ground current at the output terminal of the converter, is obtained by simulating its conducted EMI model. The reasonable simplified FE models for the converter frame, the shielded power cable, and the motor frame are established. In addition, an equivalent circuit macro model of the CM impedance of the three-phase PMSM windings is obtained by using impedance measurements, the vector fitting method, and the fast residue perturbation method. Finally, the 3-D time harmonic field-circuit coupled finite-element method is employed to evaluate the radiated EMI.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/125382