Printed Quasi-Yagi Antennas Using Double Dipoles and Stub-Loaded Technique for Multi-Band and Broadband Applications

Xu, KD; Li, D; Liu, Y; Liu, QH

Printed Quasi-Yagi Antennas Using Double Dipoles and Stub-Loaded Technique for Multi-Band and Broadband Applications

Xu, KD Li, D Liu, Y

Liu, QH

Permalink

Publication Type:: Journal Article
Citation:: IEEE Access, 2018, 6 pp. 31695 - 31702
Issue Date:: 2018-06-15

Open Access

Copyright Clearance Process

Recently Added
In Progress
Open Access

This item is open access.

Adobe PDF

Download Published VersionAdobe PDF (11.44 MB)

View on publisher's site

View statistics

Full metadata record

Field	Value	Language
dc.contributor.author	Xu, KD	en_US
dc.contributor.author	Li, D	en_US
dc.contributor.author	Liu, Y https://orcid.org/0000-0001-5466-0184	en_US
dc.contributor.author	Liu, QH	en_US
dc.date.issued	2018-06-15	en_US
dc.identifier.citation	IEEE Access, 2018, 6 pp. 31695 - 31702	en_US
dc.identifier.uri	http://hdl.handle.net/10453/132520
dc.description.abstract	© 2013 IEEE. Double dipoles on a single-layer substrate are utilized to construct a triple-mode printed quasi-Yagi antenna for the multi-band and broadband antenna applications. A stub-loaded dipole generating two resonant modes (i.e., lower dual-mode dipole) is allocated on the underside of a simple dipole (i.e., upper single-mode dipole) introducing the third resonant mode. Using these three resonant modes, three compact printed quasi-Yagi antennas, i.e., tri-band, dual-band, and broadband printed quasi-Yagi antennas, are designed with the same antenna prototype but different parameter values. Seen from the measured results, all of these three antennas have good unidirectional radiations, high radiation efficiencies, and low cross-polarization levels at the operating frequencies within the impedance bandwidths.	en_US
dc.relation.ispartof	IEEE Access	en_US
dc.relation.isbasedon	10.1109/ACCESS.2018.2838328	en_US
dc.rights	info:eu-repo/semantics/openAccess
dc.title	Printed Quasi-Yagi Antennas Using Double Dipoles and Stub-Loaded Technique for Multi-Band and Broadband Applications	en_US
dc.type	Journal Article
utslib.citation.volume	6	en_US
utslib.for	0906 Electrical and Electronic Engineering	en_US
utslib.for	08 Information and Computing Sciences	en_US
utslib.for	09 Engineering	en_US
utslib.for	10 Technology	en_US
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
pubs.organisational-group	/University of Technology Sydney/Strength - GBDTC - Global Big Data Technologies
utslib.copyright.status	open_access	*
pubs.publication-status	Published	en_US
pubs.volume	6	en_US

Abstract:

© 2013 IEEE. Double dipoles on a single-layer substrate are utilized to construct a triple-mode printed quasi-Yagi antenna for the multi-band and broadband antenna applications. A stub-loaded dipole generating two resonant modes (i.e., lower dual-mode dipole) is allocated on the underside of a simple dipole (i.e., upper single-mode dipole) introducing the third resonant mode. Using these three resonant modes, three compact printed quasi-Yagi antennas, i.e., tri-band, dual-band, and broadband printed quasi-Yagi antennas, are designed with the same antenna prototype but different parameter values. Seen from the measured results, all of these three antennas have good unidirectional radiations, high radiation efficiencies, and low cross-polarization levels at the operating frequencies within the impedance bandwidths.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/132520