Measurement of soft magnetic composite material using an improved 3-D tester with flexible excitation coils and novel sensing coils

Li, Y; Zhu, J; Yang, Q; Lin, ZW; Guo, Y; Wang, Y

Measurement of soft magnetic composite material using an improved 3-D tester with flexible excitation coils and novel sensing coils

Li, Y Zhu, J

Yang, Q Lin, ZW Guo, Y

Wang, Y

Permalink

Publication Type:: Journal Article
Citation:: IEEE Transactions on Magnetics, 2010, 46 (6), pp. 1971 - 1974
Issue Date:: 2010-06-01

Open Access

Copyright Clearance Process

Recently Added
In Progress
Open Access

This item is open access.

Adobe PDF

Download full textAdobe PDF (950.07 kB)

View on publisher's site

View statistics

Full metadata record

Field	Value	Language
dc.contributor.author	Li, Y	en_US
dc.contributor.author	Zhu, J https://orcid.org/0000-0002-9763-4047	en_US
dc.contributor.author	Yang, Q	en_US
dc.contributor.author	Lin, ZW	en_US
dc.contributor.author	Guo, Y https://orcid.org/0000-0001-6182-0684	en_US
dc.contributor.author	Wang, Y	en_US
dc.date.issued	2010-06-01	en_US
dc.identifier.citation	IEEE Transactions on Magnetics, 2010, 46 (6), pp. 1971 - 1974	en_US
dc.identifier.issn	0018-9464	en_US
dc.identifier.uri	http://hdl.handle.net/10453/13564
dc.description.abstract	In this paper, accurate measurement of three dimensional (3-D) magnetic properties of soft magnetic composite (SMC) material is carried out by using an improved 3-D tester with adjustable excitation coils and novel sensing coils attached upon the surface of the SMC specimen. Comparing with the conventional 3-D tester operating at 50 Hz, the improved 3-D tester enables measurements over wide frequency range from 2 Hz to 1000 Hz. The relationships between the B vector and H vector are measured under both alternating and rotating flux conditions, and the core loss features are analyzed. These experimental results are crucial for designing new SMC electrical machines, which are expected to operate at 200 Hz or above. © 2006 IEEE.	en_US
dc.relation.ispartof	IEEE Transactions on Magnetics	en_US
dc.relation.isbasedon	10.1109/TMAG.2010.2043339	en_US
dc.subject.classification	Applied Physics	en_US
dc.title	Measurement of soft magnetic composite material using an improved 3-D tester with flexible excitation coils and novel sensing coils	en_US
dc.type	Journal Article
utslib.citation.volume	6	en_US
utslib.citation.volume	46	en_US
utslib.for	0903 Biomedical Engineering	en_US
utslib.for	0906 Electrical and Electronic Engineering	en_US
utslib.for	02 Physical Sciences	en_US
utslib.for	09 Engineering	en_US
dc.location.activity	ISI:000278037800180	en_US
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Mechanical and Mechatronic Engineering
pubs.organisational-group	/University of Technology Sydney/Strength - CCET - Centre for Clean Energy Technology
pubs.organisational-group	/University of Technology Sydney/Strength - GEVI - Green Energy and Vehicle Innovations
utslib.copyright.status	open_access
pubs.issue	6	en_US
pubs.publication-status	Published	en_US
pubs.volume	46	en_US

Abstract:

In this paper, accurate measurement of three dimensional (3-D) magnetic properties of soft magnetic composite (SMC) material is carried out by using an improved 3-D tester with adjustable excitation coils and novel sensing coils attached upon the surface of the SMC specimen. Comparing with the conventional 3-D tester operating at 50 Hz, the improved 3-D tester enables measurements over wide frequency range from 2 Hz to 1000 Hz. The relationships between the B vector and H vector are measured under both alternating and rotating flux conditions, and the core loss features are analyzed. These experimental results are crucial for designing new SMC electrical machines, which are expected to operate at 200 Hz or above. © 2006 IEEE.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/13564