Investigation into the effect of delays between printed layers on the mechanical strength of inkjet 3DP mortar

Shakor, P; Nejadi, S; Paul, G

Investigation into the effect of delays between printed layers on the mechanical strength of inkjet 3DP mortar

Shakor, P

Nejadi, S Paul, G

Permalink

Publication Type:: Journal Article
Citation:: Manufacturing Letters, 2020, 23 pp. 19 - 22
Issue Date:: 2020-01-01

Open Access

Copyright Clearance Process

Recently Added
In Progress
Open Access

This item is open access.

The embargo period expires on 1 Jan 2022

Download Accepted ManuscriptAdobe PDF (880.57 kB)

View on publisher's site

View statistics

Full metadata record

Field	Value	Language
dc.contributor.author	Shakor, P https://orcid.org/0000-0002-6617-261X	en_US
dc.contributor.author	Nejadi, S	en_US
dc.contributor.author	Paul, G https://orcid.org/0000-0002-3478-0020	en_US
dc.date.issued	2020-01-01	en_US
dc.identifier.citation	Manufacturing Letters, 2020, 23 pp. 19 - 22	en_US
dc.identifier.issn	2213-8463	en_US
dc.identifier.uri	http://hdl.handle.net/10453/137618
dc.description.abstract	© 2019 Currently, additive manufacturing have enabled to fabricate the three-dimensional models. 3D-Printing technique is a multipurpose process for producing structural members using a sequential layering approach. The “feature quality” of 3DP specimens can be improved by optimising the build constraints. In this paper, a mortar mix powder-base has been prepared that consists of cementitious materials. Experiments are conducted to investigate the effects of different delays in printing time on the mechanical properties of the scaffolds. It has been shown that the compressive stress and strength of printed specimens with a delay of 200 ms were greater than specimens with other delay values.	en_US
dc.relation.ispartof	Manufacturing Letters	en_US
dc.relation.isbasedon	10.1016/j.mfglet.2019.11.004	en_US
dc.rights	info:eu-repo/semantics/embargoedAccess
dc.title	Investigation into the effect of delays between printed layers on the mechanical strength of inkjet 3DP mortar	en_US
dc.type	Journal Article
utslib.citation.volume	23	en_US
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Civil and Environmental Engineering
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Mechanical and Mechatronic Engineering
pubs.organisational-group	/University of Technology Sydney/Strength - CAS - Centre for Autonomous Systems
pubs.organisational-group	/University of Technology Sydney/Strength - CBI - Centre for Built Infrastructure
utslib.copyright.status	open_access	*
utslib.copyright.embargo	2022-01-01T00:00:00+1100
pubs.publication-status	Published	en_US
pubs.volume	23	en_US

Abstract:

© 2019 Currently, additive manufacturing have enabled to fabricate the three-dimensional models. 3D-Printing technique is a multipurpose process for producing structural members using a sequential layering approach. The “feature quality” of 3DP specimens can be improved by optimising the build constraints. In this paper, a mortar mix powder-base has been prepared that consists of cementitious materials. Experiments are conducted to investigate the effects of different delays in printing time on the mechanical properties of the scaffolds. It has been shown that the compressive stress and strength of printed specimens with a delay of 200 ms were greater than specimens with other delay values.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/137618