Quasi-Elliptic Bandpass Frequency Selective Surface Based on Coupled Stubs-Loaded Ring Resonators

Liao, RX; Wong, SW; Li, Y; Lin, JY; Liu, BY; Chen, FC; Quan, Z

Quasi-Elliptic Bandpass Frequency Selective Surface Based on Coupled Stubs-Loaded Ring Resonators

Liao, RX Wong, SW Li, Y Lin, JY Liu, BY Chen, FC Quan, Z

Permalink

Publisher:: Institute of Electrical and Electronics Engineers (IEEE)
Publication Type:: Journal Article
Citation:: IEEE Access, 2020, 8, pp. 113675-113682
Issue Date:: 2020-01-01

Open Access

Copyright Clearance Process

Recently Added
In Progress
Open Access

This item is open access.

Adobe PDF

Download Published versionAdobe PDF (8.48 MB)

View on publisher's site

View statistics

Full metadata record

Field	Value	Language
dc.contributor.author	Liao, RX
dc.contributor.author	Wong, SW
dc.contributor.author	Li, Y
dc.contributor.author	Lin, JY
dc.contributor.author	Liu, BY
dc.contributor.author	Chen, FC
dc.contributor.author	Quan, Z
dc.date.accessioned	2021-03-29T19:41:12Z
dc.date.available	2021-03-29T19:41:12Z
dc.date.issued	2020-01-01
dc.identifier.citation	IEEE Access, 2020, 8, pp. 113675-113682
dc.identifier.issn	2169-3536
dc.identifier.issn	2169-3536
dc.identifier.uri	http://hdl.handle.net/10453/147629
dc.description.abstract	© 2013 IEEE. In this paper, a novel design of frequency-selective surface (FSS) based on coupled stubs-loaded ring resonators (SLRRs) is proposed. The proposed FSS exhibits quasi-elliptic bandpass filtering characteristic at C-band. And each unit cell of the structure is composed of two SLRRs coupled by a circular aperture. A novel method of transmission line (TL) model is proposed to investigate the operating principle of a single SLRR under normal incidence plane wave. Moreover, the operating mechanism of the proposed FSS is further researched with the aid of the equivalent circuit model (ECM) analysis method. Due to the symmetric and low-profile physical structure, the FSS keeps stable frequency response under oblique incident plane wave for both transverse electric (TE) and transverse magnetic (TM) polarizations. Finally, the designed FSS is fabricated and measured. The measured results agree well with the simulated results. The measured results indicate that the proposed FSS exhibits a dual-polarized and stable bandpass frequency response with two transmission zeros (TZs) at around 5.71 and 6.87 GHz under different incident angles up to 40°.
dc.language	en
dc.publisher	Institute of Electrical and Electronics Engineers (IEEE)
dc.relation.ispartof	IEEE Access
dc.relation.isbasedon	10.1109/ACCESS.2020.3003319
dc.rights	© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.	en_US
dc.rights	info:eu-repo/semantics/openAccess
dc.subject	08 Information and Computing Sciences, 09 Engineering, 10 Technology
dc.title	Quasi-Elliptic Bandpass Frequency Selective Surface Based on Coupled Stubs-Loaded Ring Resonators
dc.type	Journal Article
utslib.citation.volume	8
utslib.for	0906 Electrical and Electronic Engineering
utslib.for	1005 Communications Technologies
utslib.for	08 Information and Computing Sciences
utslib.for	09 Engineering
utslib.for	10 Technology
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
utslib.copyright.status	open_access	*
dc.date.updated	2021-03-29T19:41:07Z
pubs.publication-status	Published
pubs.volume	8

Abstract:

© 2013 IEEE. In this paper, a novel design of frequency-selective surface (FSS) based on coupled stubs-loaded ring resonators (SLRRs) is proposed. The proposed FSS exhibits quasi-elliptic bandpass filtering characteristic at C-band. And each unit cell of the structure is composed of two SLRRs coupled by a circular aperture. A novel method of transmission line (TL) model is proposed to investigate the operating principle of a single SLRR under normal incidence plane wave. Moreover, the operating mechanism of the proposed FSS is further researched with the aid of the equivalent circuit model (ECM) analysis method. Due to the symmetric and low-profile physical structure, the FSS keeps stable frequency response under oblique incident plane wave for both transverse electric (TE) and transverse magnetic (TM) polarizations. Finally, the designed FSS is fabricated and measured. The measured results agree well with the simulated results. The measured results indicate that the proposed FSS exhibits a dual-polarized and stable bandpass frequency response with two transmission zeros (TZs) at around 5.71 and 6.87 GHz under different incident angles up to 40°.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/147629