FCS-MPC and Observer Design in the dq Synchronous Frame: An Experimental Validation

Zafra, E; Vazquez, S; Geyer, T; Aguilera, RP; Franquelo, LG; Leon, JI

FCS-MPC and Observer Design in the dq Synchronous Frame: An Experimental Validation

Zafra, E Vazquez, S Geyer, T Aguilera, RP Franquelo, LG Leon, JI

Permalink

Publisher:: IEEE
Publication Type:: Conference Proceeding
Citation:: Proceedings - 2020 IEEE 14th International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2020, 2020, 1, pp. 445-450
Issue Date:: 2020-07-01

Closed Access

	Filename	Description	Size
	09161551.pdf	Published version	2.6 MB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Zafra, E
dc.contributor.author	Vazquez, S
dc.contributor.author	Geyer, T
dc.contributor.author	Aguilera, RP
dc.contributor.author	Franquelo, LG
dc.contributor.author	Leon, JI
dc.date	2020-07-08
dc.date.accessioned	2021-05-04T05:49:42Z
dc.date.available	2021-05-04T05:49:42Z
dc.date.issued	2020-07-01
dc.identifier.citation	Proceedings - 2020 IEEE 14th International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2020, 2020, 1, pp. 445-450
dc.identifier.isbn	9781728142180
dc.identifier.issn	2166-9546
dc.identifier.uri	http://hdl.handle.net/10453/148610
dc.description.abstract	The addition of an output LC filter to a voltage source inverter (VSI) allows the generation of high-quality output voltages with reduced harmonic distortion content. For this reason, this topology is widely used for uninterruptible power supply (UPS) applications. To control this system, finite control set model predictive control (FCS-MPC) has been assessed in previous research with promising results. In this paper, the dq-synchronous reference frame (dq-SRF) formulation of FCS-MPC and a state observer for an UPS system are presented and experimentally validated. The advantage of this proposal lies in the simplification of the observer design by considering a deadbeat observer along with the addition of a low-pass filter. In this way, the observer bandwidth is simply determined by the cutoff frequency of the low-pass filter. Simulation and experimental results are compared to assess the performance of the proposed solution.
dc.language	en
dc.publisher	IEEE
dc.relation	http://purl.org/au-research/grants/arc/DP180100129
dc.relation.ispartof	Proceedings - 2020 IEEE 14th International Conference on Compatibility, Power Electronics and Power Engineering, CPE-POWERENG 2020
dc.relation.ispartof	IEEE 14th International Conference on Compatibility, Power Electronics and Power Engineering
dc.relation.ispartofseries	Compatibility Power Electronics and Power Engineering
dc.relation.isbasedon	10.1109/CPE-POWERENG48600.2020.9161551
dc.rights	info:eu-repo/semantics/closedAccess
dc.title	FCS-MPC and Observer Design in the dq Synchronous Frame: An Experimental Validation
dc.type	Conference Proceeding
utslib.citation.volume	1
utslib.location.activity	Setubal, Portugal
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
utslib.copyright.status	closed_access	*
pubs.consider-herdc	true
dc.date.updated	2021-05-04T05:49:05Z
pubs.finish-date	2020-07-10
pubs.publication-status	Published
pubs.start-date	2020-07-08
pubs.volume	1

Abstract:

The addition of an output LC filter to a voltage source inverter (VSI) allows the generation of high-quality output voltages with reduced harmonic distortion content. For this reason, this topology is widely used for uninterruptible power supply (UPS) applications. To control this system, finite control set model predictive control (FCS-MPC) has been assessed in previous research with promising results. In this paper, the dq-synchronous reference frame (dq-SRF) formulation of FCS-MPC and a state observer for an UPS system are presented and experimentally validated. The advantage of this proposal lies in the simplification of the observer design by considering a deadbeat observer along with the addition of a low-pass filter. In this way, the observer bandwidth is simply determined by the cutoff frequency of the low-pass filter. Simulation and experimental results are compared to assess the performance of the proposed solution.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/148610