1. OPUS at UTS

Search

Current filters:
Add Filter:

Results

Customise results display
Item hits:
Issue DateTitleAuthor(s)
2017Reprint of ''Influences of micro-friction on surface finish in micro deep drawing of SUS304 cups''Luo, L; Jiang, Z; Wei, D
2020-10-01Investigation into the shear property of thin-walled additively manufactured structures using staggered fused filament fabricationRomeijn, T; Wells, B; Wei, D; Paul, G
2022-12-15A novel order spectrum-based Vold-Kalman filter bandwidth selection scheme for fault diagnosis of gearbox in offshore wind turbinesFeng, K; Ji, JC; Wang, K; Wei, D; Zhou, C; Ni, Q
2018-10-24A novel graphene-stimulated semi-solid processing to fabricate advanced aluminium matrix nanocompositesBoostani, AF; Yazdani, S; Khosroshahi, RA; Jiang, ZY; Wei, D
2018-07-01Effect of multi-walled carbon nanotubes on the cross-linking density of the poly(glycerol sebacate) elastomeric nanocompositesYan, Y; Sencadas, V; Jin, T; Huang, X; Lie, W; Wei, D; Jiang, Z
2017-04-12Processing, characterisation and electromechanical behaviour of elastomeric multiwall carbon nanotubes-poly (glycerol sebacate) nanocomposites for piezoresistive sensors applicationsYan, Y; Sencadas, V; Zhang, J; Zu, G; Wei, D; Jiang, Z
2017-10-23Superomniphilic Poly(glycerol sebacate)–Poly(l-lactic acid) Electrospun Membranes for Oil Spill RemediationYan, Y; Sencadas, V; Zhang, J; Wei, D; Jiang, Z
2017Analysis of oxide scale deformation and surface roughness characterisation in hot rolling of stainless steelsJiang, L; Cheng, X; Jiang, Z; Wei, D
2022-11-01Instantaneous and long-term mechanical properties of Polyethylene Terephthalate Glycol (PETG) additively manufactured by pellet-based material extrusionRomeijn, T; Behrens, M; Paul, G; Wei, D
2011-01-07Finite element modeling of casting roll during twin-roll strip castingZhang, X; Jiang, Z; Wei, D; Liu, X; Wang, G
Results 31-40 of 42 (Search time: 0.019 seconds).

Discover