Electromagnetic Characteristic Analysis of BFSLRM

Guo, K; Guo, Y

Electromagnetic Characteristic Analysis of BFSLRM

Guo, K Guo, Y

Permalink

Publisher:: IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC
Publication Type:: Journal Article
Citation:: IEEE Transactions on Applied Superconductivity, 2021, 31, (8)
Issue Date:: 2021-11-01

Open Access

Copyright Clearance Process

Recently Added
In Progress
Open Access

This item is open access.

The embargo period expires on 30 Nov 2023

Adobe PDF

Download Accepted versionAdobe PDF (1.32 MB)

View on publisher's site

View statistics

Full metadata record

Field	Value	Language
dc.contributor.author	Guo, K
dc.contributor.author	Guo, Y https://orcid.org/0000-0001-6182-0684
dc.date.accessioned	2022-04-22T21:26:02Z
dc.date.available	2022-04-22T21:26:02Z
dc.date.issued	2021-11-01
dc.identifier.citation	IEEE Transactions on Applied Superconductivity, 2021, 31, (8)
dc.identifier.issn	1051-8223
dc.identifier.issn	1558-2515
dc.identifier.uri	http://hdl.handle.net/10453/156551
dc.description.abstract	Flux concentrated structure is adopted in the design of bidirectional flux switching linear-rotary motor, which not only brings high torque/thrust density, but also increases stator iron material magnetic saturation. In order to decrease the magnetic maturation level of the motor, the stator pole width, stator pole axial length, permanent magnet (PM) width, PM axial length and stator yoke height are selected as the analysis variables, which are closely related to the two magnetic saturation regions of the stator section based on the initial analysis. The expressions of flux density in the two magnetically saturated regions of the stator core related with the selected five structure variables are derived by numerical fitting method based on the initial simulation result calculated by finite element method. Then the optimization structure variable values are achieved, a prototype and its test experiment are carried out, which verifies that the torque and thrust densities are improved and the numerical fitting method is efficient and accurate for magnetic saturation calculation.
dc.language	English
dc.publisher	IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC
dc.relation.ispartof	IEEE Transactions on Applied Superconductivity
dc.relation.isbasedon	10.1109/TASC.2021.3096486
dc.rights	info:eu-repo/semantics/embargoedAccess
dc.subject	0204 Condensed Matter Physics, 0906 Electrical and Electronic Engineering, 0912 Materials Engineering
dc.subject.classification	General Physics
dc.title	Electromagnetic Characteristic Analysis of BFSLRM
dc.type	Journal Article
utslib.citation.volume	31
utslib.for	0204 Condensed Matter Physics
utslib.for	0906 Electrical and Electronic Engineering
utslib.for	0912 Materials Engineering
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
utslib.copyright.status	open_access	*
utslib.copyright.embargo	2023-11-30T00:00:00+1000Z
dc.date.updated	2022-04-22T21:25:59Z
pubs.issue	8
pubs.publication-status	Published
pubs.volume	31
utslib.citation.issue	8

Abstract:

Flux concentrated structure is adopted in the design of bidirectional flux switching linear-rotary motor, which not only brings high torque/thrust density, but also increases stator iron material magnetic saturation. In order to decrease the magnetic maturation level of the motor, the stator pole width, stator pole axial length, permanent magnet (PM) width, PM axial length and stator yoke height are selected as the analysis variables, which are closely related to the two magnetic saturation regions of the stator section based on the initial analysis. The expressions of flux density in the two magnetically saturated regions of the stator core related with the selected five structure variables are derived by numerical fitting method based on the initial simulation result calculated by finite element method. Then the optimization structure variable values are achieved, a prototype and its test experiment are carried out, which verifies that the torque and thrust densities are improved and the numerical fitting method is efficient and accurate for magnetic saturation calculation.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/156551