Forward osmosis system design and optimization using a commercial cellulose triacetate hollow fibre membrane module for energy efficient desalination
- Publisher:
- Elsevier
- Publication Type:
- Journal Article
- Citation:
- Desalination, 2021, 510, pp. 1-12
- Issue Date:
- 2021-08-15
Closed Access
| Filename | Description | Size | |||
|---|---|---|---|---|---|
| 1-s2.0-S0011916421001466-main.pdf | 4.93 MB |
Copyright Clearance Process
- Recently Added
- In Progress
- Closed Access
This item is closed access and not available.
This study is aimed at developing system mathematical design models to simulate and optimize a full scale forward osmosis (FO) for a hollow fibre membrane module for energy efficient desalination. Experimental data from a commercial outer selective CTA hollow fibre FO membrane module was used for validation. Less than 10% difference between the simulation and experimental results were observed which validated the reliability of the models. Simulation and design were performed for a 1000 m3/day FO plant using 0.6 M NaCl as draw solution (DS) (~seawater) and 0.02 M NaCl feed solution (FS) (~MBR effluent) to produce 0.25, 0.2 and 0.15 M NaCl diluted seawater to reduce the energy consumption of downstream pressure driven desalination process. A single element parallel module arrangement was found more suitable for this commercial hollow fibre membrane element. Finally, the numerical simulations revealed that to achieve 0.25, 0.20 and 0.15 M final DS concentrations, the optimum number of modules required were 370, 435 and 555 respectively considering membrane cost and energy consumption. The FO system using the commercial CTA hollow fibre module was found more energy efficient than a commercial TFC spiral wound membrane module.
Please use this identifier to cite or link to this item: