No-Load Performance Analysis of an Asymmetric-Pole Single-Phase Doubly Salient Permanent Magnet Machine

Xu, W; Zhang, Y; Du, G; He, M; Zhu, J

No-Load Performance Analysis of an Asymmetric-Pole Single-Phase Doubly Salient Permanent Magnet Machine

Xu, W Zhang, Y Du, G He, M Zhu, J

Permalink

Publisher:: Institute of Electrical and Electronics Engineers
Publication Type:: Journal Article
Citation:: IEEE Transactions on Industrial Electronics, 2021, 68, (4), pp. 2907-2918
Issue Date:: 2021-04-01

Closed Access

	Filename	Description	Size
	No-Load_Performance_Analysis_of_an_Asymmetric-Pole_Single-Phase_Doubly_Salient_Permanent_Magnet_Machine.pdf		6.5 MB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Xu, W
dc.contributor.author	Zhang, Y
dc.contributor.author	Du, G
dc.contributor.author	He, M
dc.contributor.author	Zhu, J https://orcid.org/0000-0002-9763-4047
dc.date.accessioned	2022-05-18T02:27:41Z
dc.date.available	2022-05-18T02:27:41Z
dc.date.issued	2021-04-01
dc.identifier.citation	IEEE Transactions on Industrial Electronics, 2021, 68, (4), pp. 2907-2918
dc.identifier.issn	0278-0046
dc.identifier.issn	1557-9948
dc.identifier.uri	http://hdl.handle.net/10453/157484
dc.description.abstract	Asymmetric-pole single-phase doubly salient permanent magnet machine (APSP-DSPMM) can yield higher torque and lower dead zone than the traditional one. Some special structural factors, such as the stator pole pieces, unequal air-gap lengths, and seriously saturated auxiliary teeth, if not properly considered, may bring large errors in the electromagnetic performance evaluation. This article proposes an improved magnetomotive force-specific permeance method to account for these special structural factors. This method is implemented numerically to obtain the electromagnetic performance of APSP-DSPMM under the conditions of no-load and full-load, and the results are compared with those of the two-dimensional finite-element analysis. The theoretical results are verified by the experimental test results of a prototype.
dc.language	English
dc.publisher	Institute of Electrical and Electronics Engineers
dc.relation.ispartof	IEEE Transactions on Industrial Electronics
dc.relation.isbasedon	10.1109/TIE.2020.2978686
dc.rights	info:eu-repo/semantics/closedAccess
dc.subject	08 Information and Computing Sciences, 09 Engineering
dc.subject.classification	Electrical & Electronic Engineering
dc.title	No-Load Performance Analysis of an Asymmetric-Pole Single-Phase Doubly Salient Permanent Magnet Machine
dc.type	Journal Article
utslib.citation.volume	68
utslib.for	08 Information and Computing Sciences
utslib.for	09 Engineering
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Strength - CCET - Centre for Clean Energy Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
utslib.copyright.status	closed_access	*
pubs.consider-herdc	false
dc.date.updated	2022-05-18T02:27:34Z
pubs.issue	4
pubs.publication-status	Published
pubs.volume	68
utslib.citation.issue	4

Abstract:

Asymmetric-pole single-phase doubly salient permanent magnet machine (APSP-DSPMM) can yield higher torque and lower dead zone than the traditional one. Some special structural factors, such as the stator pole pieces, unequal air-gap lengths, and seriously saturated auxiliary teeth, if not properly considered, may bring large errors in the electromagnetic performance evaluation. This article proposes an improved magnetomotive force-specific permeance method to account for these special structural factors. This method is implemented numerically to obtain the electromagnetic performance of APSP-DSPMM under the conditions of no-load and full-load, and the results are compared with those of the two-dimensional finite-element analysis. The theoretical results are verified by the experimental test results of a prototype.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/157484