Quasi-Z-source-based bidirectional DC-DC converters for renewable energy applications

Raj Kafle, Y; Hossain, MJ; Kashif, M

Quasi-Z-source-based bidirectional DC-DC converters for renewable energy applications

Raj Kafle, Y Hossain, MJ Kashif, M

Permalink

Publisher:: WILEY
Publication Type:: Journal Article
Citation:: International Transactions on Electrical Energy Systems, 2021, 31, (4)
Issue Date:: 2021-04-01

Open Access

Copyright Clearance Process

Recently Added
In Progress
Open Access

This item is open access.

Adobe PDF

Download Accepted versionAdobe PDF (20.83 MB)

View on publisher's site

View statistics

Full metadata record

Field	Value	Language
dc.contributor.author	Raj Kafle, Y
dc.contributor.author	Hossain, MJ
dc.contributor.author	Kashif, M
dc.date.accessioned	2022-06-03T04:02:27Z
dc.date.available	2022-06-03T04:02:27Z
dc.date.issued	2021-04-01
dc.identifier.citation	International Transactions on Electrical Energy Systems, 2021, 31, (4)
dc.identifier.issn	2050-7038
dc.identifier.issn	2050-7038
dc.identifier.uri	http://hdl.handle.net/10453/157899
dc.description.abstract	This article presents a design, analysis, and implementation of a novel impedance-source-based bidirectional DC-DC converter. The proposed converter employs an impedance network to the existing dual-active-bridge (DAB) circuit. It inherits all the advantages of the DAB converter along with extra benefits. Compared with the traditional isolated DC-DC converter, the proposed converter improved the boost ability of the converter. Also, the converter can withstand the shoot-through phenomenon in an H-bridge, improving the reliability. The converter can work in the normal buck/boost DAB mode when extra boost is not required. The bidirectional feature is inherent along with soft switching capability. It is therefore well-suited for the applications, where wide range of voltage gains are required such as renewable energy systems. The topological configuration and control strategy of the proposed topology in both operational modes are discussed. Simulation and experiments have been carried out to demonstrate the effectiveness of the proposed converter topology. The peak efficiency 97% was observed at the rated load of 500 W.
dc.language	English
dc.publisher	WILEY
dc.relation.ispartof	International Transactions on Electrical Energy Systems
dc.relation.isbasedon	10.1002/2050-7038.12823
dc.rights	info:eu-repo/semantics/openAccess
dc.subject	0906 Electrical and Electronic Engineering
dc.subject.classification	Energy
dc.title	Quasi-Z-source-based bidirectional DC-DC converters for renewable energy applications
dc.type	Journal Article
utslib.citation.volume	31
utslib.for	0906 Electrical and Electronic Engineering
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
utslib.copyright.status	open_access	*
dc.date.updated	2022-06-03T04:02:17Z
pubs.issue	4
pubs.publication-status	Published
pubs.volume	31
utslib.citation.issue	4

Abstract:

This article presents a design, analysis, and implementation of a novel impedance-source-based bidirectional DC-DC converter. The proposed converter employs an impedance network to the existing dual-active-bridge (DAB) circuit. It inherits all the advantages of the DAB converter along with extra benefits. Compared with the traditional isolated DC-DC converter, the proposed converter improved the boost ability of the converter. Also, the converter can withstand the shoot-through phenomenon in an H-bridge, improving the reliability. The converter can work in the normal buck/boost DAB mode when extra boost is not required. The bidirectional feature is inherent along with soft switching capability. It is therefore well-suited for the applications, where wide range of voltage gains are required such as renewable energy systems. The topological configuration and control strategy of the proposed topology in both operational modes are discussed. Simulation and experiments have been carried out to demonstrate the effectiveness of the proposed converter topology. The peak efficiency 97% was observed at the rated load of 500 W.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/157899