3D Printed Millimetre-Wave and Sub-Terahertz Devices: Prospects, Challenges, and Solutions

Yang, Y; Li, M; Esselle, K; Thalakotuna, D

3D Printed Millimetre-Wave and Sub-Terahertz Devices: Prospects, Challenges, and Solutions

Yang, Y Li, M Esselle, K

Thalakotuna, D

Permalink

Publisher:: IEEE
Publication Type:: Conference Proceeding
Citation:: 2022 16th European Conference on Antennas and Propagation, EuCAP 2022, 2022, pp. 1-4
Issue Date:: 2022-01-01

Embargoed

	Filename	Description	Size
	3D Printed millimetre-wave and sub-terahertz devices.pdf	Accepted version	714.52 kB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Embargoed
Open Access

This item is currently unavailable due to the publisher's embargo.

The embargo period expires on 11 May 2024

Full metadata record

Field	Value	Language
dc.contributor.author	Yang, Y
dc.contributor.author	Li, M
dc.contributor.author	Esselle, K https://orcid.org/0000-0002-3681-0086
dc.contributor.author	Thalakotuna, D https://orcid.org/0000-0002-4504-6139
dc.date	2022-03-27
dc.date.accessioned	2022-06-15T06:03:33Z
dc.date.available	2022-06-15T06:03:33Z
dc.date.issued	2022-01-01
dc.identifier.citation	2022 16th European Conference on Antennas and Propagation, EuCAP 2022, 2022, pp. 1-4
dc.identifier.isbn	9788831299046
dc.identifier.uri	http://hdl.handle.net/10453/158193
dc.description.abstract	Advanced additive manufacturing (AM) technology enjoys the advantages of fast-prototyping, low-entry-cost, and in-house short-run manufacturing, which empowers millions of start-ups and companies with demanding confidentiality and accelerated innovation. The advancement of AM technology will circumvent the limitations of traditional 3D printed microwave circuits and antennas. This talk aims to present the fundamental knowledge about AM technology and its capability in microwave/millimeter-wave/terahertz circuits and antenna designs. This article presents the state-of-the-art 3D printing technologies and their applications in the millimeter-wave, and sub-terahertz designs, including meta lenses, frequency selective surfaces, waveguides, and antennas.
dc.language	en
dc.publisher	IEEE
dc.relation.ispartof	2022 16th European Conference on Antennas and Propagation, EuCAP 2022
dc.relation.ispartof	2022 16th European Conference on Antennas and Propagation (EuCAP)
dc.relation.isbasedon	10.23919/eucap53622.2022.9769224
dc.rights	info:eu-repo/semantics/embargoedAccess
dc.title	3D Printed Millimetre-Wave and Sub-Terahertz Devices: Prospects, Challenges, and Solutions
dc.type	Conference Proceeding
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
utslib.copyright.status	embargoed	*
utslib.copyright.embargo	2024-05-11T00:00:00+1000Z
dc.date.updated	2022-06-15T06:03:32Z
pubs.finish-date	2022-04-01
pubs.publication-status	Published
pubs.start-date	2022-03-27

Abstract:

Advanced additive manufacturing (AM) technology enjoys the advantages of fast-prototyping, low-entry-cost, and in-house short-run manufacturing, which empowers millions of start-ups and companies with demanding confidentiality and accelerated innovation. The advancement of AM technology will circumvent the limitations of traditional 3D printed microwave circuits and antennas. This talk aims to present the fundamental knowledge about AM technology and its capability in microwave/millimeter-wave/terahertz circuits and antenna designs. This article presents the state-of-the-art 3D printing technologies and their applications in the millimeter-wave, and sub-terahertz designs, including meta lenses, frequency selective surfaces, waveguides, and antennas.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/158193