A low-profile printed planar phase correcting surface to improve directive radiation characteristics of electromagnetic band gap resonator antennas

Afzal, MU; Esselle, KP

A low-profile printed planar phase correcting surface to improve directive radiation characteristics of electromagnetic band gap resonator antennas

Afzal, MU Esselle, KP

Permalink

Publisher:: IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC
Publication Type:: Journal Article
Citation:: IEEE Transactions on Antennas and Propagation, 2016, 64, (1), pp. 276-280
Issue Date:: 2016-01-01

Closed Access

	Filename	Description	Size
	A_Low-Profile_Printed_Planar_Phase_Correcting_Surface_to_Improve_Directive_Radiation_Characteristics_of_Electromagnetic_Band_Gap_Resonator_Antennas.pdf	Published version	1.07 MB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Afzal, MU
dc.contributor.author	Esselle, KP
dc.date.accessioned	2022-08-15T02:51:39Z
dc.date.available	2022-08-15T02:51:39Z
dc.date.issued	2016-01-01
dc.identifier.citation	IEEE Transactions on Antennas and Propagation, 2016, 64, (1), pp. 276-280
dc.identifier.issn	0018-926X
dc.identifier.issn	1558-2221
dc.identifier.uri	http://hdl.handle.net/10453/160179
dc.description.abstract	This communication presents a method to enhance the radiation performance of conventional electromagnetic band gap resonator antennas (ERAs) by improving their aperture phase distributions. A lowprofile printed planar phase correcting surface (PCS) was designed and fabricated to demonstrate performance enhancement. Measurements of a prototype demonstrated that the PCS significantly enhances the directive radiation properties of ERAs. This includes an 8 dB increase in peak directivity, 60% reduction in 3 dB beamwidth (from 35° to 14°), and a considerable reduction in side lobe levels.
dc.language	English
dc.publisher	IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC
dc.relation.ispartof	IEEE Transactions on Antennas and Propagation
dc.relation.isbasedon	10.1109/TAP.2015.2493159
dc.rights	info:eu-repo/semantics/closedAccess
dc.subject	0906 Electrical and Electronic Engineering, 1005 Communications Technologies
dc.subject.classification	Networking & Telecommunications
dc.title	A low-profile printed planar phase correcting surface to improve directive radiation characteristics of electromagnetic band gap resonator antennas
dc.type	Journal Article
utslib.citation.volume	64
utslib.for	0906 Electrical and Electronic Engineering
utslib.for	1005 Communications Technologies
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
utslib.copyright.status	closed_access	*
dc.date.updated	2022-08-15T02:51:38Z
pubs.issue	1
pubs.publication-status	Published
pubs.volume	64
utslib.citation.issue	1

Abstract:

This communication presents a method to enhance the radiation performance of conventional electromagnetic band gap resonator antennas (ERAs) by improving their aperture phase distributions. A lowprofile printed planar phase correcting surface (PCS) was designed and fabricated to demonstrate performance enhancement. Measurements of a prototype demonstrated that the PCS significantly enhances the directive radiation properties of ERAs. This includes an 8 dB increase in peak directivity, 60% reduction in 3 dB beamwidth (from 35° to 14°), and a considerable reduction in side lobe levels.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/160179