Lubricity of bio-based lubricant derived from different chemically modified fatty acid methyl ester

Zulkifli, NWM; Azman, SSN; Kalam, MA; Masjuki, HH; Yunus, R; Gulzar, M

Lubricity of bio-based lubricant derived from different chemically modified fatty acid methyl ester

Zulkifli, NWM Azman, SSN Kalam, MA Masjuki, HH Yunus, R Gulzar, M

Permalink

Publisher:: ELSEVIER SCI LTD
Publication Type:: Journal Article
Citation:: Tribology International, 2016, 93, pp. 555-562
Issue Date:: 2016-01-01

Closed Access

	Filename	Description	Size
	1-s2.0-S0301679X15001140-main.pdf	Published version	1.9 MB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Zulkifli, NWM
dc.contributor.author	Azman, SSN
dc.contributor.author	Kalam, MA
dc.contributor.author	Masjuki, HH
dc.contributor.author	Yunus, R
dc.contributor.author	Gulzar, M
dc.date.accessioned	2022-08-16T02:48:29Z
dc.date.available	2022-08-16T02:48:29Z
dc.date.issued	2016-01-01
dc.identifier.citation	Tribology International, 2016, 93, pp. 555-562
dc.identifier.issn	0301-679X
dc.identifier.issn	1879-2464
dc.identifier.uri	http://hdl.handle.net/10453/160303
dc.description.abstract	In this research, polyol ester was used as the source of a biolubricant. The trimethylolpropane (TMP) and pentaerythritol ester (PE) were produced from palm oil methyl ester; they are biodegradable and have high lubricity properties. Two different conditions of lubrication were investigated. Under these test conditions, the wear and friction characteristics of different ester samples were measured and compared. The esters derived from PE and TMP had comparable characteristics to the fully formulated lubricant (FFL) in terms of the coefficient of friction (CoF). In terms of the mixed lubrication condition, the PE ester has the lowest CoF.
dc.language	English
dc.publisher	ELSEVIER SCI LTD
dc.relation.ispartof	Tribology International
dc.relation.isbasedon	10.1016/j.triboint.2015.03.024
dc.rights	info:eu-repo/semantics/closedAccess
dc.subject	0910 Manufacturing Engineering, 0913 Mechanical Engineering
dc.subject.classification	Mechanical Engineering & Transports
dc.title	Lubricity of bio-based lubricant derived from different chemically modified fatty acid methyl ester
dc.type	Journal Article
utslib.citation.volume	93
utslib.location.activity	Leeds Trin Univ, Leeds, ENGLAND
utslib.for	0910 Manufacturing Engineering
utslib.for	0913 Mechanical Engineering
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Civil and Environmental Engineering
utslib.copyright.status	closed_access	*
dc.date.updated	2022-08-16T02:48:26Z
pubs.publication-status	Published
pubs.volume	93

Abstract:

In this research, polyol ester was used as the source of a biolubricant. The trimethylolpropane (TMP) and pentaerythritol ester (PE) were produced from palm oil methyl ester; they are biodegradable and have high lubricity properties. Two different conditions of lubrication were investigated. Under these test conditions, the wear and friction characteristics of different ester samples were measured and compared. The esters derived from PE and TMP had comparable characteristics to the fully formulated lubricant (FFL) in terms of the coefficient of friction (CoF). In terms of the mixed lubrication condition, the PE ester has the lowest CoF.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/160303