Optimal Design of High Density HTS-SMES Step-Shaped Cross- Sectional Solenoid to mechanical stress reduction

Asadi, AHK; Jahangiri, A; Zand, M; Eskandari, M; Nasab, MA; Meyar-Naimi, H

Optimal Design of High Density HTS-SMES Step-Shaped Cross- Sectional Solenoid to mechanical stress reduction

Asadi, AHK Jahangiri, A Zand, M Eskandari, M

Nasab, MA Meyar-Naimi, H

Permalink

Publisher:: IEEE
Publication Type:: Conference Proceeding
Citation:: 2022 International Conference on Protection and Automation of Power Systems (IPAPS), 2022, 00, pp. 1-6
Issue Date:: 2022-01-01

Closed Access

	Filename	Description	Size
	Optimal Design of High Density HTS-SMES Step-Shaped Cross- Sectional Solenoid to mechanical stress reduction.pdf	Published version	308.52 kB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Asadi, AHK
dc.contributor.author	Jahangiri, A
dc.contributor.author	Zand, M
dc.contributor.author	Eskandari, M https://orcid.org/0000-0003-1185-9585
dc.contributor.author	Nasab, MA
dc.contributor.author	Meyar-Naimi, H
dc.date	2022-01-19
dc.date.accessioned	2023-04-11T02:10:38Z
dc.date.available	2023-04-11T02:10:38Z
dc.date.issued	2022-01-01
dc.identifier.citation	2022 International Conference on Protection and Automation of Power Systems (IPAPS), 2022, 00, pp. 1-6
dc.identifier.isbn	9781665484374
dc.identifier.uri	http://hdl.handle.net/10453/169502
dc.description.abstract	The high temperature superconducting magnetic energy storage (HTS-SMES) system has an efficient system and is able to storing energy in high density. Therefore, this is an attractive method of energy restore in power system for protection and stability control. In the other hand, one of the most important challenges in HTS-SMES is optimal coil design that have direct relationship with energy stored in unit length of the coil conductor, length of the wire is used, and finally the cost of the winding. In order to resolve design problems, a recent three-objective optimization of the mechanical stress of a coil, uniformity of the magnetic field inside the magnet and coil volume is presented in this paper. Three constraints include energy requirements, the stray field in an around coil, the quench condition and maximum mechanical stress of the HTS-SMES coil are considered. To optimize this three objective optimization design problem, multi objective evolutionary algorithm based on decomposition (MOEA/D) has been used. We optimized step-shaped solenoid coil with maximum mechanical stress and current density constraints. 400 MA/m2 and stresses of about 400 MPa. HTS-SMES solenoid optimal design based on YBCO is considered and the YBCO-coated conductor is employed for the HTS-SMES coil. In this paper, FYSC-SC05 YBCO and FYSC-SC10 tape produced by FUJIKURA superconductor technology company are chosen In this method, in addition to mechanical stress determination, dimension of the HTS-SMES step-shaped cross sectional solenoid is determined. Results show that mechanical stress in FYSC-SC05 and FYSC-SC10 13.5%, 22.3% reduced related to maximum limitation of mechanical stress, respectively.
dc.language	en
dc.publisher	IEEE
dc.relation.ispartof	2022 International Conference on Protection and Automation of Power Systems (IPAPS)
dc.relation.ispartof	2022 International Conference on Protection and Automation of Power Systems (IPAPS)
dc.relation.isbasedon	10.1109/ipaps55380.2022.9763198
dc.rights	info:eu-repo/semantics/closedAccess
dc.title	Optimal Design of High Density HTS-SMES Step-Shaped Cross- Sectional Solenoid to mechanical stress reduction
dc.type	Conference Proceeding
utslib.citation.volume	00
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
utslib.copyright.status	closed_access	*
dc.date.updated	2023-04-11T02:10:37Z
pubs.finish-date	2022-01-20
pubs.publication-status	Published
pubs.start-date	2022-01-19
pubs.volume	00

Abstract:

The high temperature superconducting magnetic energy storage (HTS-SMES) system has an efficient system and is able to storing energy in high density. Therefore, this is an attractive method of energy restore in power system for protection and stability control. In the other hand, one of the most important challenges in HTS-SMES is optimal coil design that have direct relationship with energy stored in unit length of the coil conductor, length of the wire is used, and finally the cost of the winding. In order to resolve design problems, a recent three-objective optimization of the mechanical stress of a coil, uniformity of the magnetic field inside the magnet and coil volume is presented in this paper. Three constraints include energy requirements, the stray field in an around coil, the quench condition and maximum mechanical stress of the HTS-SMES coil are considered. To optimize this three objective optimization design problem, multi objective evolutionary algorithm based on decomposition (MOEA/D) has been used. We optimized step-shaped solenoid coil with maximum mechanical stress and current density constraints. 400 MA/m2 and stresses of about 400 MPa. HTS-SMES solenoid optimal design based on YBCO is considered and the YBCO-coated conductor is employed for the HTS-SMES coil. In this paper, FYSC-SC05 YBCO and FYSC-SC10 tape produced by FUJIKURA superconductor technology company are chosen In this method, in addition to mechanical stress determination, dimension of the HTS-SMES step-shaped cross sectional solenoid is determined. Results show that mechanical stress in FYSC-SC05 and FYSC-SC10 13.5%, 22.3% reduced related to maximum limitation of mechanical stress, respectively.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/169502