Radiation Characteristics of Three Dimensional Printed Meta-surface in Broadside Condition

Shrestha, S; Abbas, SM; Asadnia, M; Esselle, KP

Radiation Characteristics of Three Dimensional Printed Meta-surface in Broadside Condition

Shrestha, S Abbas, SM Asadnia, M Esselle, KP

Permalink

Publisher:: Institute of Electrical and Electronics Engineers (IEEE)
Publication Type:: Conference Proceeding
Citation:: 2022 International Symposium on Antennas and Propagation, ISAP 2022, 2022, 00, pp. 73-74
Issue Date:: 2022-11-03

Closed Access

	Filename	Description	Size
	Radiation_Characteristics_of_Three_Dimensional_Printed_Meta-surface_in_Broadside_Condition.pdf	Published version	1.22 MB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Shrestha, S
dc.contributor.author	Abbas, SM
dc.contributor.author	Asadnia, M
dc.contributor.author	Esselle, KP
dc.date	2022-10-31
dc.date.accessioned	2023-04-13T03:58:08Z
dc.date.available	2023-04-13T03:58:08Z
dc.date.issued	2022-11-03
dc.identifier.citation	2022 International Symposium on Antennas and Propagation, ISAP 2022, 2022, 00, pp. 73-74
dc.identifier.isbn	9781665479622
dc.identifier.uri	http://hdl.handle.net/10453/169757
dc.description.abstract	Broadside condition of Three dimensional printed Meta-surface is presented in this paper. Cubes arranged in specific patterns are considered to design the Beam Deviating Surface (BDS) and Conical Rotating Surface (CRS) where both the surfaces are arranged opposite to each other as per the increasing phase gradient. Two surfaces are 120 mm × 120 mm × 30 mm (4.8λ × 4.8λ × 1.2λ) in dimensions. The measured broadside radiation patterns in 180 degree case of orientation for CRS prototype matches well with simulated results and are wide band in operation. The measured directivity and gain values were maintained from 17 to 23 dBi throughout the operating Ku band frequency range.
dc.language	en
dc.publisher	Institute of Electrical and Electronics Engineers (IEEE)
dc.relation.ispartof	2022 International Symposium on Antennas and Propagation, ISAP 2022
dc.relation.ispartof	2022 International Symposium on Antennas and Propagation (ISAP)
dc.relation.isbasedon	10.1109/isap53582.2022.9998713
dc.rights	info:eu-repo/semantics/closedAccess
dc.title	Radiation Characteristics of Three Dimensional Printed Meta-surface in Broadside Condition
dc.type	Conference Proceeding
utslib.citation.volume	00
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
utslib.copyright.status	closed_access	*
dc.date.updated	2023-04-13T03:58:07Z
pubs.finish-date	2022-11-03
pubs.publication-status	Published
pubs.start-date	2022-10-31
pubs.volume	00

Abstract:

Broadside condition of Three dimensional printed Meta-surface is presented in this paper. Cubes arranged in specific patterns are considered to design the Beam Deviating Surface (BDS) and Conical Rotating Surface (CRS) where both the surfaces are arranged opposite to each other as per the increasing phase gradient. Two surfaces are 120 mm × 120 mm × 30 mm (4.8λ × 4.8λ × 1.2λ) in dimensions. The measured broadside radiation patterns in 180 degree case of orientation for CRS prototype matches well with simulated results and are wide band in operation. The measured directivity and gain values were maintained from 17 to 23 dBi throughout the operating Ku band frequency range.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/169757