3D Printed Polarisation Insensitive Wideband Metasurfaces for Dynamic Polarization Conversion and Beam Shaping

Lai, J; Zhu, J; Yang, Y

3D Printed Polarisation Insensitive Wideband Metasurfaces for Dynamic Polarization Conversion and Beam Shaping

Lai, J

Zhu, J Yang, Y

Permalink

Publisher:: IEEE
Publication Type:: Conference Proceeding
Citation:: 2023 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting (USNC-URSI), 2023, 2023-July, pp. 793-794
Issue Date:: 2023-01-01

Closed Access

	Filename	Description	Size
	3D_Printed_Polarisation_Insensitive_Wideband_Metasurfaces_for_Dynamic_Polarization_Conversion_and_Beam_Shaping.pdf	Published version	576.29 kB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Lai, J https://orcid.org/0000-0001-5330-1569
dc.contributor.author	Zhu, J
dc.contributor.author	Yang, Y https://orcid.org/0000-0001-7439-2156
dc.date	2023-07-23
dc.date.accessioned	2024-01-26T03:17:30Z
dc.date.available	2024-01-26T03:17:30Z
dc.date.issued	2023-01-01
dc.identifier.citation	2023 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting (USNC-URSI), 2023, 2023-July, pp. 793-794
dc.identifier.isbn	9781665442282
dc.identifier.issn	1522-3965
dc.identifier.uri	http://hdl.handle.net/10453/174970
dc.description.abstract	Broadband polarization insensitive transmissive metasurfaces were proposed for anomalous refraction with 45° polarisation conversion and vortex beams with 90° polarisation conversion. By using four-way phase delay lines and a transmitting-receiving (Tx-Rx) antenna, the meta-atom can realise both a full-cycle (2π) transmission phase and polarisation conversion. The polarisation conversion and tilted beam angle are fixed with different incident polarisations of electromagnetic (EM) waves. The additive manufacturing technique is used to fabricate two prototypes.
dc.language	en
dc.publisher	IEEE
dc.relation.ispartof	2023 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting (USNC-URSI)
dc.relation.ispartof	2023 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting (USNC-URSI)
dc.relation.isbasedon	10.1109/usnc-ursi52151.2023.10237479
dc.rights	info:eu-repo/semantics/closedAccess
dc.title	3D Printed Polarisation Insensitive Wideband Metasurfaces for Dynamic Polarization Conversion and Beam Shaping
dc.type	Conference Proceeding
utslib.citation.volume	2023-July
pubs.organisational-group	University of Technology Sydney
pubs.organisational-group	University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
utslib.copyright.status	closed_access	*
dc.date.updated	2024-01-26T03:17:28Z
pubs.finish-date	2023-07-28
pubs.publication-status	Published
pubs.start-date	2023-07-23
pubs.volume	2023-July

Abstract:

Broadband polarization insensitive transmissive metasurfaces were proposed for anomalous refraction with 45° polarisation conversion and vortex beams with 90° polarisation conversion. By using four-way phase delay lines and a transmitting-receiving (Tx-Rx) antenna, the meta-atom can realise both a full-cycle (2π) transmission phase and polarisation conversion. The polarisation conversion and tilted beam angle are fixed with different incident polarisations of electromagnetic (EM) waves. The additive manufacturing technique is used to fabricate two prototypes.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/174970