Standardisation of low clinker cements containing calcined clay and limestone: a review by RILEM TC-282 CCL

Kanavaris, F; Vieira, M; Bishnoi, S; Zhao, Z; Wilson, W; Tagnit Hamou, A; Avet, F; Castel, A; Zunino, F; Visalaksh, T; Martirena, F; Bernal, SA; Juenger, MCG; Riding, K

Standardisation of low clinker cements containing calcined clay and limestone: a review by RILEM TC-282 CCL

Kanavaris, F Vieira, M Bishnoi, S Zhao, Z Wilson, W Tagnit Hamou, A Avet, F Castel, A

Zunino, F Visalaksh, T Martirena, F Bernal, SA Juenger, MCG Riding, K

Permalink

Publisher:: SPRINGER
Publication Type:: Journal Article
Citation:: Materials and Structures/Materiaux et Constructions, 2023, 56, (9)
Issue Date:: 2023-11-01

Closed Access

	Filename	Description	Size
	s11527-023-02257-y.pdf	Published version	326.25 kB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Kanavaris, F
dc.contributor.author	Vieira, M
dc.contributor.author	Bishnoi, S
dc.contributor.author	Zhao, Z
dc.contributor.author	Wilson, W
dc.contributor.author	Tagnit Hamou, A
dc.contributor.author	Avet, F
dc.contributor.author	Castel, A https://orcid.org/0000-0003-1619-9643
dc.contributor.author	Zunino, F
dc.contributor.author	Visalaksh, T
dc.contributor.author	Martirena, F
dc.contributor.author	Bernal, SA
dc.contributor.author	Juenger, MCG
dc.contributor.author	Riding, K
dc.date.accessioned	2024-04-10T05:48:28Z
dc.date.available	2024-04-10T05:48:28Z
dc.date.issued	2023-11-01
dc.identifier.citation	Materials and Structures/Materiaux et Constructions, 2023, 56, (9)
dc.identifier.issn	1359-5997
dc.identifier.issn	1871-6873
dc.identifier.uri	http://hdl.handle.net/10453/177648
dc.description.abstract	Materials used in concrete construction are highly regulated through national standards that set minimum material reactivity, composition, and performance. Advances have shown that the combination of calcined clay and limestone fines in cementitious systems can have a synergistic reaction that allows for high levels of clinker replacement while maintaining adequate mechanical properties and durability. Recent modifications to national standards and codes have been made to allow for the use of calcined clay and limestone fines in concrete, albeit with some restrictions on use. Building codes also impose limits such as maximum water-to-cement/binder)-ratio, minimum strength, and minimum cement content as means to meet design service life requirements in lieu of measuring durability properties. This paper reviews the major standards and codes related to calcined clay materials and their use in concrete and suggests changes that could increase adoption and clinker replacement. It is hoped that this review will provide insights that can help facilitate the wider adoption of these materials in the construction industry as well as to identify potential changes in standards or creation of new ones which might be needed to enable the rapid widespread uptake of this promising technology.
dc.language	English
dc.publisher	SPRINGER
dc.relation.ispartof	Materials and Structures/Materiaux et Constructions
dc.relation.isbasedon	10.1617/s11527-023-02257-y
dc.rights	info:eu-repo/semantics/closedAccess
dc.subject	0905 Civil Engineering
dc.subject.classification	Building & Construction
dc.subject.classification	4005 Civil engineering
dc.title	Standardisation of low clinker cements containing calcined clay and limestone: a review by RILEM TC-282 CCL
dc.type	Journal Article
utslib.citation.volume	56
utslib.for	0905 Civil Engineering
pubs.organisational-group	University of Technology Sydney
pubs.organisational-group	University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	University of Technology Sydney/Faculty of Engineering and Information Technology/School of Civil and Environmental Engineering
utslib.copyright.status	closed_access	*
dc.date.updated	2024-04-10T05:48:27Z
pubs.issue	9
pubs.publication-status	Published
pubs.volume	56
utslib.citation.issue	9

Abstract:

Materials used in concrete construction are highly regulated through national standards that set minimum material reactivity, composition, and performance. Advances have shown that the combination of calcined clay and limestone fines in cementitious systems can have a synergistic reaction that allows for high levels of clinker replacement while maintaining adequate mechanical properties and durability. Recent modifications to national standards and codes have been made to allow for the use of calcined clay and limestone fines in concrete, albeit with some restrictions on use. Building codes also impose limits such as maximum water-to-cement/binder)-ratio, minimum strength, and minimum cement content as means to meet design service life requirements in lieu of measuring durability properties. This paper reviews the major standards and codes related to calcined clay materials and their use in concrete and suggests changes that could increase adoption and clinker replacement. It is hoped that this review will provide insights that can help facilitate the wider adoption of these materials in the construction industry as well as to identify potential changes in standards or creation of new ones which might be needed to enable the rapid widespread uptake of this promising technology.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/177648