Three Dimensional Printable Prototype to Realize Uniformity in Aperture Phase Distribution

Shrestha, S; Abbas, SM; Asadnia, M; Esselle, KP

Three Dimensional Printable Prototype to Realize Uniformity in Aperture Phase Distribution

Shrestha, S Abbas, SM Asadnia, M Esselle, KP

Permalink

Publisher:: IEEE
Publication Type:: Conference Proceeding
Citation:: 2023 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting (USNC-URSI), 2023, 2023-July, pp. 1095-1096
Issue Date:: 2023-01-01

Closed Access

	Filename	Description	Size
	Three_Dimensional_Printable_Prototype_to_Realize_Uniformity_in_Aperture_Phase_Distribution.pdf	Published version	1.63 MB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Shrestha, S
dc.contributor.author	Abbas, SM
dc.contributor.author	Asadnia, M
dc.contributor.author	Esselle, KP
dc.date	2023-07-23
dc.date.accessioned	2024-04-19T09:17:08Z
dc.date.available	2024-04-19T09:17:08Z
dc.date.issued	2023-01-01
dc.identifier.citation	2023 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting (USNC-URSI), 2023, 2023-July, pp. 1095-1096
dc.identifier.isbn	9781665442282
dc.identifier.issn	1522-3965
dc.identifier.uri	http://hdl.handle.net/10453/178094
dc.description.abstract	Analysi s in phase uniformity have been challenging aspect in design of Meta-surface. The proposed prototype shows less phase variation of about 7.96°, in 6.25 mm (0.25λ) above the top surface of it. The phase uniformity is observed in 300° case which is positioned in 12.5 mm(0.5λ) above the aperture of horn source in design frequency of 12 GHz. The proposed 3D printable prototype is of 105 mm × 105mm× 37.5 mm(4.2λ× 4.2λ× 1.5λ) in dimension. The antenna exhibits wibeband in nature from 10 to 15 GHz whereas Voltage Standing Wave Ratio (VSWR) are less than 2.5 across the operating Ku-band frequency range.
dc.language	en
dc.publisher	IEEE
dc.relation.ispartof	2023 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting (USNC-URSI)
dc.relation.ispartof	2023 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting (USNC-URSI)
dc.relation.isbasedon	10.1109/usnc-ursi52151.2023.10237587
dc.rights	info:eu-repo/semantics/closedAccess
dc.title	Three Dimensional Printable Prototype to Realize Uniformity in Aperture Phase Distribution
dc.type	Conference Proceeding
utslib.citation.volume	2023-July
pubs.organisational-group	University of Technology Sydney
pubs.organisational-group	University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
utslib.copyright.status	closed_access	*
dc.date.updated	2024-04-19T09:17:06Z
pubs.finish-date	2023-07-28
pubs.publication-status	Published
pubs.start-date	2023-07-23
pubs.volume	2023-July

Abstract:

Analysi s in phase uniformity have been challenging aspect in design of Meta-surface. The proposed prototype shows less phase variation of about 7.96°, in 6.25 mm (0.25λ) above the top surface of it. The phase uniformity is observed in 300° case which is positioned in 12.5 mm(0.5λ) above the aperture of horn source in design frequency of 12 GHz. The proposed 3D printable prototype is of 105 mm × 105mm× 37.5 mm(4.2λ× 4.2λ× 1.5λ) in dimension. The antenna exhibits wibeband in nature from 10 to 15 GHz whereas Voltage Standing Wave Ratio (VSWR) are less than 2.5 across the operating Ku-band frequency range.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/178094