Effects of machining parameters on H13 die steel using CNC drilling machine

KB, H; S, V; G, N; R, P; Alwetaishi, M; Alahmadi, AA; Alzaed, AN; MA, K; Shahapurkar, K

Effects of machining parameters on H13 die steel using CNC drilling machine

KB, H S, V G, N R, P Alwetaishi, M Alahmadi, AA Alzaed, AN MA, K Shahapurkar, K

Permalink

Publisher:: SAGE Publications
Publication Type:: Journal Article
Citation:: Composites and Advanced Materials, 2023, 32, pp. 1-17
Issue Date:: 2023-12

Open Access

Copyright Clearance Process

Recently Added
In Progress
Open Access

This item is open access.

Adobe PDF

Download Published versionAdobe PDF (1.44 MB)

View on publisher's site

View statistics

Full metadata record

Field	Value	Language
dc.contributor.author	KB, H
dc.contributor.author	S, V
dc.contributor.author	G, N
dc.contributor.author	R, P
dc.contributor.author	Alwetaishi, M
dc.contributor.author	Alahmadi, AA
dc.contributor.author	Alzaed, AN
dc.contributor.author	MA, K
dc.contributor.author	Shahapurkar, K
dc.date.accessioned	2024-04-23T20:13:24Z
dc.date.available	2024-04-23T20:13:24Z
dc.date.issued	2023-12
dc.identifier.citation	Composites and Advanced Materials, 2023, 32, pp. 1-17
dc.identifier.issn	2634-9833
dc.identifier.issn	2634-9833
dc.identifier.uri	http://hdl.handle.net/10453/178303
dc.description.abstract	In order to enhance the fitness of the product and in order to improve productivity in turning operations greater amount of challenges have been faced In this paper we have made a comparative analysis of HSS and carbide coated HSS drills while machining with H13 steel plates For the drilling operation process parameters were analysed using the Taguchi design of experiments The response performance characteristics of surface roughness of H13 die steel plates for the drilling settings cutting speed rpm and feed rate mm min is optimized The design of the experiment was conducted using the Taguchi technique for the L18 orthogonal array and an analysis of variance was observed The effect of drilling settings on the quality of drilled holes is examined variation in surface roughness for various levels of speed and feed and the different combinations of these levels will form an L18 orthogonal array design of experiment by Taguchi analysis A total of 36 cutting tests were performed with two different drill bits here three different cutting speeds of 300 600 and 900 rpm were taken with a feed rate of 0 02 0 04 and 0 06 mm rev combinations The response of SN ratio for surface roughness of HSS and carbide tool has been found out for different levels of speed and feed From this Taguchi analysis it is identified that the optimal parameter As a result the factors are analysed and optimized parameters have been concluded for H13 material using HSS and carbide tools were examined both statistically and experimentally The carbide coated drill bit gives 60 better surface roughness value based on experimental data obtained The surface roughness value based on experimentation for HSS tool was found to be 34 16 and carbide coated drill bit was 23 40
dc.language	en
dc.publisher	SAGE Publications
dc.relation.ispartof	Composites and Advanced Materials
dc.relation.isbasedon	10.1177/26349833231189296
dc.rights	info:eu-repo/semantics/openAccess
dc.title	Effects of machining parameters on H13 die steel using CNC drilling machine
dc.type	Journal Article
utslib.citation.volume	32
pubs.organisational-group	University of Technology Sydney
pubs.organisational-group	University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	University of Technology Sydney/Faculty of Engineering and Information Technology/School of Civil and Environmental Engineering
pubs.organisational-group	University of Technology Sydney/Strength - CTWW - Centre for Technology in Water and Wastewater Treatment
utslib.copyright.status	open_access	*
pubs.consider-herdc	true
dc.date.updated	2024-04-23T20:13:22Z
pubs.publication-status	Published
pubs.volume	32

Abstract:

In order to enhance the fitness of the product and in order to improve productivity in turning operations greater amount of challenges have been faced In this paper we have made a comparative analysis of HSS and carbide coated HSS drills while machining with H13 steel plates For the drilling operation process parameters were analysed using the Taguchi design of experiments The response performance characteristics of surface roughness of H13 die steel plates for the drilling settings cutting speed rpm and feed rate mm min is optimized The design of the experiment was conducted using the Taguchi technique for the L18 orthogonal array and an analysis of variance was observed The effect of drilling settings on the quality of drilled holes is examined variation in surface roughness for various levels of speed and feed and the different combinations of these levels will form an L18 orthogonal array design of experiment by Taguchi analysis A total of 36 cutting tests were performed with two different drill bits here three different cutting speeds of 300 600 and 900 rpm were taken with a feed rate of 0 02 0 04 and 0 06 mm rev combinations The response of SN ratio for surface roughness of HSS and carbide tool has been found out for different levels of speed and feed From this Taguchi analysis it is identified that the optimal parameter As a result the factors are analysed and optimized parameters have been concluded for H13 material using HSS and carbide tools were examined both statistically and experimentally The carbide coated drill bit gives 60 better surface roughness value based on experimental data obtained The surface roughness value based on experimentation for HSS tool was found to be 34 16 and carbide coated drill bit was 23 40

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/178303