Effect of Reaction Time on Production Biodiesel of Schleichera oleosa

Suherman, S; Ilmi, A; Sabri, M; Silitonga, AS

Effect of Reaction Time on Production Biodiesel of Schleichera oleosa

Suherman, S Ilmi, A Sabri, M Silitonga, AS

Permalink

Publisher:: Trans Tech Publications
Publication Type:: Conference Proceeding
Citation:: Engineering Headway, 2024, 6, pp. 43-52
Issue Date:: 2024-05-16

Closed Access

	Filename	Description	Size
	Engineering Headway Effect of Reaction Time on Production Biodiesel of Schleichera Oleosa.pdf	Published version	669.82 kB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Suherman, S
dc.contributor.author	Ilmi, A
dc.contributor.author	Sabri, M
dc.contributor.author	Silitonga, AS
dc.date	2023-08-07
dc.date.accessioned	2024-05-12T04:38:46Z
dc.date.available	2024-05-12T04:38:46Z
dc.date.issued	2024-05-16
dc.identifier.citation	Engineering Headway, 2024, 6, pp. 43-52
dc.identifier.issn	2813-8325
dc.identifier.issn	2813-8333
dc.identifier.uri	http://hdl.handle.net/10453/178841
dc.description.abstract	<jats:p>The world's energy needs to be enhanced after the COVID-19 pandemic has caused a shortage of petroleum-based fuels that has occurred in almost all countries in the world. It is essential to use non-edible vegetable oil as a renewable energy source. This study aimed to produce <jats:italic>Schleichera Oleosa</jats:italic> oil as biodiesel using a homogeneous catalyst (KOH). This study uses the ester/transesterification method in which <jats:italic>Schleichera oleosa</jats:italic> oil (SO) is heated in a 1L double jacket reactor at 60 °C. The results showed that the optimum conditions were obtained at 0.75 vol% KOH and an agitation speed of 1000 rpm with a reaction time of 90 minutes. This condition resulted in a biodiesel yield of 89%. Furthermore, it was found that the high oxidation stability was 9.03 h, and the pour point was 9 °C. Thus, the physicochemical biodiesel produced is acceptable according to the ASTM 6751 standard.</jats:p>
dc.language	en
dc.publisher	Trans Tech Publications
dc.relation	Department of Industry, Innovation and ScienceICG002425
dc.relation.ispartof	Engineering Headway
dc.relation.ispartof	6th International Conference on Science and Engineering (ICSE)
dc.relation.isbasedon	10.4028/p-2duepe
dc.rights	info:eu-repo/semantics/closedAccess
dc.title	Effect of Reaction Time on Production Biodiesel of Schleichera oleosa
dc.type	Conference Proceeding
utslib.citation.volume	6
pubs.organisational-group	University of Technology Sydney
pubs.organisational-group	University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	University of Technology Sydney/Faculty of Engineering and Information Technology/School of Civil and Environmental Engineering
pubs.organisational-group	University of Technology Sydney/Strength - CTWW - Centre for Technology in Water and Wastewater Treatment
utslib.copyright.status	closed_access	*
dc.date.updated	2024-05-12T04:38:44Z
pubs.finish-date	2023-08-09
pubs.publication-status	Published online
pubs.start-date	2023-08-07
pubs.volume	6

Abstract:

The world's energy needs to be enhanced after the COVID-19 pandemic has caused a shortage of petroleum-based fuels that has occurred in almost all countries in the world. It is essential to use non-edible vegetable oil as a renewable energy source. This study aimed to produce Schleichera Oleosa oil as biodiesel using a homogeneous catalyst (KOH). This study uses the ester/transesterification method in which Schleichera oleosa oil (SO) is heated in a 1L double jacket reactor at 60 °C. The results showed that the optimum conditions were obtained at 0.75 vol% KOH and an agitation speed of 1000 rpm with a reaction time of 90 minutes. This condition resulted in a biodiesel yield of 89%. Furthermore, it was found that the high oxidation stability was 9.03 h, and the pour point was 9 °C. Thus, the physicochemical biodiesel produced is acceptable according to the ASTM 6751 standard.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/178841