ENHANCEMENT OF QUICK CHARGING AND DISCHARGING OF TERMO ENERGY STORAGE SYSTEM BY PCM MIXED WITH Al<inf>2</inf>O<inf>3</inf> NANOPARTICLES FOR ELECTRIC VEHICLES

Viswanathan, S; Arockiaraj, GA; Obaid, SA; Kalam, MA

ENHANCEMENT OF QUICK CHARGING AND DISCHARGING OF TERMO ENERGY STORAGE SYSTEM BY PCM MIXED WITH Al<inf>2</inf>O<inf>3</inf> NANOPARTICLES FOR ELECTRIC VEHICLES

Viswanathan, S Arockiaraj, GA Obaid, SA Kalam, MA

Permalink

Publisher:: National Library of Serbia
Publication Type:: Journal Article
Citation:: Thermal Science, 2024, 28, (1), pp. 189-196
Issue Date:: 2024-01-01

Open Access

Copyright Clearance Process

Recently Added
In Progress
Open Access

This item is open access.

Download Published versionAdobe PDF (720.25 kB)

View on publisher's site

View statistics

Full metadata record

Field	Value	Language
dc.contributor.author	Viswanathan, S
dc.contributor.author	Arockiaraj, GA
dc.contributor.author	Obaid, SA
dc.contributor.author	Kalam, MA
dc.date.accessioned	2025-03-31T05:49:42Z
dc.date.available	2025-03-31T05:49:42Z
dc.date.issued	2024-01-01
dc.identifier.citation	Thermal Science, 2024, 28, (1), pp. 189-196
dc.identifier.issn	0354-9836
dc.identifier.issn	2334-7163
dc.identifier.uri	http://hdl.handle.net/10453/186371
dc.description.abstract	Technology for storing heat energy with small amount of area has been proposed a challenge to the researchers over the past few decades. This would render highly useful for the thermal management system of electric vehicles. The PCM was used as an energy storage system in this work. It offers the chief advantage of higher storage density which is very much expected for both industrial and domestic needs, especially electric vehicles. In this work, the enhancement of specific heat capacity for the provided PCM was improved by embedding alumina nanoparticles into the storage medium. The addition of nanoparticles in the PCM resulted in the increase of heat absorption capacity, a 50% increase in charging time and a 25% reduction in discharging time of the PCM for the volume concentration of 0.833%. The increase of efficiency by 6% during charging and 4% during the discharging processes were observed as the effect of addition of alumina nanoparticle in the system.
dc.language	en
dc.publisher	National Library of Serbia
dc.relation.ispartof	Thermal Science
dc.relation.isbasedon	10.2298/TSCI221126269V
dc.rights	info:eu-repo/semantics/openAccess
dc.subject	0904 Chemical Engineering, 0913 Mechanical Engineering, 0914 Resources Engineering and Extractive Metallurgy
dc.subject.classification	Energy
dc.subject.classification	4012 Fluid mechanics and thermal engineering
dc.title	ENHANCEMENT OF QUICK CHARGING AND DISCHARGING OF TERMO ENERGY STORAGE SYSTEM BY PCM MIXED WITH Al<inf>2</inf>O<inf>3</inf> NANOPARTICLES FOR ELECTRIC VEHICLES
dc.type	Journal Article
utslib.citation.volume	28
utslib.for	0904 Chemical Engineering
utslib.for	0913 Mechanical Engineering
utslib.for	0914 Resources Engineering and Extractive Metallurgy
pubs.organisational-group	University of Technology Sydney
pubs.organisational-group	University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	University of Technology Sydney/Faculty of Engineering and Information Technology/School of Civil and Environmental Engineering
utslib.copyright.status	open_access	*
dc.rights.license	This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License (CC BY-NC-ND 4.0). To view a copy of this license, visit https://creativecommons.org/licenses/by-nc-nd/4.0/
dc.date.updated	2025-03-31T05:49:41Z
pubs.issue	1
pubs.publication-status	Published
pubs.volume	28
utslib.citation.issue	1

Abstract:

Technology for storing heat energy with small amount of area has been proposed a challenge to the researchers over the past few decades. This would render highly useful for the thermal management system of electric vehicles. The PCM was used as an energy storage system in this work. It offers the chief advantage of higher storage density which is very much expected for both industrial and domestic needs, especially electric vehicles. In this work, the enhancement of specific heat capacity for the provided PCM was improved by embedding alumina nanoparticles into the storage medium. The addition of nanoparticles in the PCM resulted in the increase of heat absorption capacity, a 50% increase in charging time and a 25% reduction in discharging time of the PCM for the volume concentration of 0.833%. The increase of efficiency by 6% during charging and 4% during the discharging processes were observed as the effect of addition of alumina nanoparticle in the system.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/186371