Enhanced thermal response of phase change materials using optimized fin geometries in a dual-enclosure heat storage unit

Elangovan, V; Mahalingam, R; Junaid, M; Saha, G

Enhanced thermal response of phase change materials using optimized fin geometries in a dual-enclosure heat storage unit

Elangovan, V Mahalingam, R Junaid, M Saha, G

Permalink

Publisher:: Elsevier
Publication Type:: Journal Article
Citation:: Chemical Thermodynamics and Thermal Analysis, 2025, 20, pp. 100218
Issue Date:: 2025-10-01

Open Access

Copyright Clearance Process

Recently Added
In Progress
Open Access

This item is open access.

Adobe PDF

Download Published versionAdobe PDF (6 MB)

View on publisher's site

View statistics

Full metadata record

Field	Value	Language
dc.contributor.author	Elangovan, V
dc.contributor.author	Mahalingam, R
dc.contributor.author	Junaid, M
dc.contributor.author	Saha, G https://orcid.org/0000-0001-6467-298X
dc.date.accessioned	2025-12-19T04:33:54Z
dc.date.available	2025-12-19T04:33:54Z
dc.date.issued	2025-10-01
dc.identifier.citation	Chemical Thermodynamics and Thermal Analysis, 2025, 20, pp. 100218
dc.identifier.issn	2667-3126
dc.identifier.issn	2667-3126
dc.identifier.uri	http://hdl.handle.net/10453/191029
dc.description.abstract	The inherently low thermal conductivity of phase change materials (PCMs) poses a significant limitation to the performance of latent heat thermal energy storage (LHTES) systems. This study presents a comprehensive numerical investigation into the melting behavior of RT-27 PCM within a two-dimensional chamfered dual-enclosure, equipped with internal and external aluminum fins of four distinct geometries: rectangular, triangular, U-shaped, and wavy. The system is subjected to constant heat fluxes of 500, 1000, 1500, and 2000 W/m². The enthalpy–porosity method is employed in ANSYS Fluent 2021 to solve the governing equations, and model validation is performed against experimental data to ensure reliability. Results demonstrate that fin geometry substantially influences melting rate, thermal uniformity, and energy storage efficiency. At a heat flux of 1000 W/m², the U-shaped fin achieved complete melting in 2000 s, with an average temperature of 365 K and stored energy of ∼160 kJ/kg. In contrast, the triangular fin exhibited the slowest response, completing melting in 2700 s with a lower average temperature of 315 K and energy storage of ∼75 kJ/kg. Increasing heat flux to 2000 W/m² reduced melting time to 1400 s in the U-shaped configuration, confirming its superior thermal performance. The wavy and rectangular fins also showed favorable results, balancing thermal response and uniformity. The findings confirm that the integration of U-shaped and rectangular fins enhances heat propagation, reduces phase-change duration, and improves energy storage capacity. These insights provide a strategic framework for designing compact, high-efficiency LHTES systems for applications in energy, electronics, and thermal management technologies.
dc.language	en
dc.publisher	Elsevier
dc.relation.ispartof	Chemical Thermodynamics and Thermal Analysis
dc.relation.isbasedon	10.1016/j.ctta.2025.100218
dc.rights	info:eu-repo/semantics/openAccess
dc.title	Enhanced thermal response of phase change materials using optimized fin geometries in a dual-enclosure heat storage unit
dc.type	Journal Article
utslib.citation.volume	20
pubs.organisational-group	University of Technology Sydney
pubs.organisational-group	University of Technology Sydney/Faculty of Engineering and Information Technology
utslib.copyright.status	open_access	*
dc.rights.license	This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0). To view a copy of this license, visit https://creativecommons.org/licenses/by-nc/4.0/
dc.date.updated	2025-12-19T04:33:52Z
pubs.publication-status	Published
pubs.volume	20

Abstract:

The inherently low thermal conductivity of phase change materials (PCMs) poses a significant limitation to the performance of latent heat thermal energy storage (LHTES) systems. This study presents a comprehensive numerical investigation into the melting behavior of RT-27 PCM within a two-dimensional chamfered dual-enclosure, equipped with internal and external aluminum fins of four distinct geometries: rectangular, triangular, U-shaped, and wavy. The system is subjected to constant heat fluxes of 500, 1000, 1500, and 2000 W/m². The enthalpy–porosity method is employed in ANSYS Fluent 2021 to solve the governing equations, and model validation is performed against experimental data to ensure reliability. Results demonstrate that fin geometry substantially influences melting rate, thermal uniformity, and energy storage efficiency. At a heat flux of 1000 W/m², the U-shaped fin achieved complete melting in 2000 s, with an average temperature of 365 K and stored energy of ∼160 kJ/kg. In contrast, the triangular fin exhibited the slowest response, completing melting in 2700 s with a lower average temperature of 315 K and energy storage of ∼75 kJ/kg. Increasing heat flux to 2000 W/m² reduced melting time to 1400 s in the U-shaped configuration, confirming its superior thermal performance. The wavy and rectangular fins also showed favorable results, balancing thermal response and uniformity. The findings confirm that the integration of U-shaped and rectangular fins enhances heat propagation, reduces phase-change duration, and improves energy storage capacity. These insights provide a strategic framework for designing compact, high-efficiency LHTES systems for applications in energy, electronics, and thermal management technologies.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/191029