Outline design of a direct-drive low-speed brushless permanent-magnet generator for an ocean-going Bristol-cylinder type device

Dorrell, DG; Ngu, SS; Cossar, C

Outline design of a direct-drive low-speed brushless permanent-magnet generator for an ocean-going Bristol-cylinder type device

Dorrell, DG

Ngu, SS Cossar, C

Permalink

Publication Type:: Conference Proceeding
Citation:: IEEE International Symposium on Industrial Electronics, 2012, pp. 1444 - 1449
Issue Date:: 2012-08-15

Closed Access

	Filename	Description	Size
	2011006035OK.pdf		791.6 kB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Dorrell, DG https://orcid.org/0000-0001-8060-3386	en_US
dc.contributor.author	Ngu, SS	en_US
dc.contributor.author	Cossar, C	en_US
dc.date.issued	2012-08-15	en_US
dc.identifier.citation	IEEE International Symposium on Industrial Electronics, 2012, pp. 1444 - 1449	en_US
dc.identifier.isbn	9781467301589	en_US
dc.identifier.uri	http://hdl.handle.net/10453/22390
dc.description.abstract	This paper describes the simple design rules that can be used to design direct-drive brushless generators for an ocean wave device. This is a very low speed device so the pole number and diameter is very large. While these machines may be large the pole pitch and axial length is low. The application is described and an air-gap wound design developed and simulated using analytical and finite element analysis techniques. A 248 pole design with surface rotor magnets is developed. © 2012 IEEE.	en_US
dc.relation.ispartof	IEEE International Symposium on Industrial Electronics	en_US
dc.relation.isbasedon	10.1109/ISIE.2012.6237303	en_US
dc.title	Outline design of a direct-drive low-speed brushless permanent-magnet generator for an ocean-going Bristol-cylinder type device	en_US
dc.type	Conference Proceeding
utslib.for	0906 Electrical and Electronic Engineering	en_US
dc.location.activity	Hangzhou, China	en_US
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
utslib.copyright.status	closed_access
pubs.publication-status	Published	en_US

Abstract:

This paper describes the simple design rules that can be used to design direct-drive brushless generators for an ocean wave device. This is a very low speed device so the pole number and diameter is very large. While these machines may be large the pole pitch and axial length is low. The application is described and an air-gap wound design developed and simulated using analytical and finite element analysis techniques. A 248 pole design with surface rotor magnets is developed. © 2012 IEEE.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/22390