An assessment of the influence of sampling frequency on steady-state performance of PMSM drive system

Wang, T; Guo, Y; Zhu, J; Zhang, Y

An assessment of the influence of sampling frequency on steady-state performance of PMSM drive system

Wang, T Guo, Y

Zhu, J

Zhang, Y

Permalink

Publication Type:: Conference Proceeding
Citation:: 2012 22nd Australasian Universities Power Engineering Conference: "Green Smart Grid Systems", AUPEC 2012, 2012
Issue Date:: 2012-12-01

Closed Access

	Filename	Description	Size
	2012001761OK.pdf		1.41 MB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Wang, T	en_US
dc.contributor.author	Guo, Y https://orcid.org/0000-0001-6182-0684	en_US
dc.contributor.author	Zhu, J https://orcid.org/0000-0002-9763-4047	en_US
dc.contributor.author	Zhang, Y https://orcid.org/0000-0001-8480-2948	en_US
dc.date.issued	2012-12-01	en_US
dc.identifier.citation	2012 22nd Australasian Universities Power Engineering Conference: "Green Smart Grid Systems", AUPEC 2012, 2012	en_US
dc.identifier.isbn	9789791884723	en_US
dc.identifier.uri	http://hdl.handle.net/10453/23125
dc.description.abstract	This paper presents simulation and experimental studies of permanent magnet synchronous motor (PMSM) control methods, including vector control (VC) or field oriented control (FOC), direct torque control (DTC) and model predictive control (MPC). The steady-state performances under a range of sampling frequency (1.5k Hz-20k Hz) of each method are performed in Matlab/Simulink and dSAPCE system. A comprehensive analysis based on these tests shows that the efficiency of control methods (sampling frequency vs. torque ripple) decreases along with the increase of sampling frequency. © 2012 Institut Teknologi Sepulul.	en_US
dc.relation.ispartof	2012 22nd Australasian Universities Power Engineering Conference: "Green Smart Grid Systems", AUPEC 2012	en_US
dc.title	An assessment of the influence of sampling frequency on steady-state performance of PMSM drive system	en_US
dc.type	Conference Proceeding
utslib.for	0906 Electrical and Electronic Engineering	en_US
dc.location.activity	Bali, Indonesia	en_US
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
pubs.organisational-group	/University of Technology Sydney/Strength - CCET - Centre for Clean Energy Technology
utslib.copyright.status	closed_access
pubs.publication-status	Published	en_US

Abstract:

This paper presents simulation and experimental studies of permanent magnet synchronous motor (PMSM) control methods, including vector control (VC) or field oriented control (FOC), direct torque control (DTC) and model predictive control (MPC). The steady-state performances under a range of sampling frequency (1.5k Hz-20k Hz) of each method are performed in Matlab/Simulink and dSAPCE system. A comprehensive analysis based on these tests shows that the efficiency of control methods (sampling frequency vs. torque ripple) decreases along with the increase of sampling frequency. © 2012 Institut Teknologi Sepulul.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/23125