Magnetic circuit modeling of brushless doubly-fed machines with induction and reluctance rotors

Hsieh, MF; Lin, IH; Dorrell, D

Magnetic circuit modeling of brushless doubly-fed machines with induction and reluctance rotors

Hsieh, MF Lin, IH Dorrell, D

Permalink

Publication Type:: Journal Article
Citation:: IEEE Transactions on Magnetics, 2013, 49 (5), pp. 2359 - 2362
Issue Date:: 2013-05-22

Closed Access

	Filename	Description	Size
	2013001145OK.pdf		634.58 kB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Hsieh, MF	en_US
dc.contributor.author	Lin, IH	en_US
dc.contributor.author	Dorrell, D https://orcid.org/0000-0001-8060-3386	en_US
dc.date.issued	2013-05-22	en_US
dc.identifier.citation	IEEE Transactions on Magnetics, 2013, 49 (5), pp. 2359 - 2362	en_US
dc.identifier.issn	0018-9464	en_US
dc.identifier.uri	http://hdl.handle.net/10453/27216
dc.description.abstract	This paper presents a magnetic circuit modeling (MCM) technique for analysis of the brushless doubly-fed machine (BDFM). Two rotor types are considered: the induction type and the reluctance type. The flux density in both the stator and rotor can be calculated by the developed MCM. This is particularly beneficial to the BDFM with the induction rotor since the generated rotor currents may saturate the rotor or stator and this is difficult to foresee at the design stage due to the complex flux patterns in the machine. A coupling factor is proposed to determine the flux coupling between the stator and rotor teeth of the induction type of BDFM. Saturation is also considered in the MCM. Finite element analysis is used to verify the analytical results. © 1965-2012 IEEE.	en_US
dc.relation.ispartof	IEEE Transactions on Magnetics	en_US
dc.relation.isbasedon	10.1109/TMAG.2013.2242459	en_US
dc.subject.classification	Applied Physics	en_US
dc.title	Magnetic circuit modeling of brushless doubly-fed machines with induction and reluctance rotors	en_US
dc.type	Journal Article
utslib.citation.volume	5	en_US
utslib.citation.volume	49	en_US
utslib.for	090699 Electrical and Electronic Engineering not elsewhere classified	en_US
utslib.for	02 Physical Sciences	en_US
utslib.for	09 Engineering	en_US
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
utslib.copyright.status	closed_access
pubs.issue	5	en_US
pubs.publication-status	Published	en_US
pubs.volume	49	en_US

Abstract:

This paper presents a magnetic circuit modeling (MCM) technique for analysis of the brushless doubly-fed machine (BDFM). Two rotor types are considered: the induction type and the reluctance type. The flux density in both the stator and rotor can be calculated by the developed MCM. This is particularly beneficial to the BDFM with the induction rotor since the generated rotor currents may saturate the rotor or stator and this is difficult to foresee at the design stage due to the complex flux patterns in the machine. A coupling factor is proposed to determine the flux coupling between the stator and rotor teeth of the induction type of BDFM. Saturation is also considered in the MCM. Finite element analysis is used to verify the analytical results. © 1965-2012 IEEE.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/27216