Analysis of unbalanced magnetic pull in wound rotor induction machines using finite element analysis - Transient, motoring and generating modes

Dorrell, DG; Hermann, A; Jensen, BB

Analysis of unbalanced magnetic pull in wound rotor induction machines using finite element analysis - Transient, motoring and generating modes

Dorrell, DG

Hermann, A Jensen, BB

Permalink

Publication Type:: Conference Proceeding
Citation:: IECON Proceedings (Industrial Electronics Conference), 2013, pp. 7307 - 7312
Issue Date:: 2013-12-01

Closed Access

	Filename	Description	Size
	2013001164OK.pdf		758.7 kB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Dorrell, DG https://orcid.org/0000-0001-8060-3386	en_US
dc.contributor.author	Hermann, A	en_US
dc.contributor.author	Jensen, BB	en_US
dc.date.issued	2013-12-01	en_US
dc.identifier.citation	IECON Proceedings (Industrial Electronics Conference), 2013, pp. 7307 - 7312	en_US
dc.identifier.isbn	9781479902248	en_US
dc.identifier.uri	http://hdl.handle.net/10453/27256
dc.description.abstract	There has been much literature on unbalanced magnetic pull in various types of electrical machine. This can lead to bearing wear and additional vibrations in the machine. In this paper a wound rotor induction is studied. Finite element analysis studies are conducted when the rotor has 10 % rotor eccentricity. The operating conditions are varied so that transient, motoring and doubly-fed induction generator modes are studied. This allows greater understanding of the radial forces involved. Wound rotor induction machines exhibit higher unbalanced magnetic pull than cage induction machines so this is an interesting aspect of their characteristic to address. © 2013 IEEE.	en_US
dc.relation.ispartof	IECON Proceedings (Industrial Electronics Conference)	en_US
dc.relation.isbasedon	10.1109/IECON.2013.6700348	en_US
dc.title	Analysis of unbalanced magnetic pull in wound rotor induction machines using finite element analysis - Transient, motoring and generating modes	en_US
dc.type	Conference Proceeding
utslib.for	090699 Electrical and Electronic Engineering not elsewhere classified	en_US
dc.location.activity	Vienna, Austria	en_US
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Mechanical and Mechatronic Engineering
utslib.copyright.status	closed_access
pubs.publication-status	Published	en_US

Abstract:

There has been much literature on unbalanced magnetic pull in various types of electrical machine. This can lead to bearing wear and additional vibrations in the machine. In this paper a wound rotor induction is studied. Finite element analysis studies are conducted when the rotor has 10 % rotor eccentricity. The operating conditions are varied so that transient, motoring and doubly-fed induction generator modes are studied. This allows greater understanding of the radial forces involved. Wound rotor induction machines exhibit higher unbalanced magnetic pull than cage induction machines so this is an interesting aspect of their characteristic to address. © 2013 IEEE.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/27256