Analysis of cold rolling of ultra thin strip

Jiang, ZY; Wei, D; Tieu, AK

Analysis of cold rolling of ultra thin strip

Jiang, ZY Wei, D

Tieu, AK

Permalink

Publication Type:: Journal Article
Citation:: Journal of Materials Processing Technology, 2009, 209 (9), pp. 4584 - 4589
Issue Date:: 2009-05-01

Closed Access

	Filename	Description	Size
	2013007429OK.pdf	Published Version	610.69 kB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Jiang, ZY	en_US
dc.contributor.author	Wei, D https://orcid.org/0000-0002-4247-8905	en_US
dc.contributor.author	Tieu, AK	en_US
dc.date.issued	2009-05-01	en_US
dc.identifier.citation	Journal of Materials Processing Technology, 2009, 209 (9), pp. 4584 - 4589	en_US
dc.identifier.issn	0924-0136	en_US
dc.identifier.uri	http://hdl.handle.net/10453/30761
dc.description.abstract	In this paper, the cold rolling experiments of ultra thin steel strip were carried out on an experimental rolling mill. The cold rolling of ultra thin strip with roll edge kiss was analysed theoretically, and the rolling force, intermediate force between the work roll and backup roll, the roll edge kiss force, the strip shape after rolling are obtained for this special rolling, and they are compared for various reduction and friction coefficients. Simulation results show that the reduction has a significant influence on the shape of rolled strip, and the calculated rolling forces and strip profile are consistent with the measured values. The effect of friction in the roll bite on cold rolling of ultra thin strip with roll edge kiss is also discussed. Surface characteristic was measured and it is shown that the steel surface roughness value reduces with an increase of reduction. © 2008 Elsevier B.V. All rights reserved.	en_US
dc.relation.ispartof	Journal of Materials Processing Technology	en_US
dc.relation.isbasedon	10.1016/j.jmatprotec.2008.10.035	en_US
dc.subject.classification	Materials	en_US
dc.title	Analysis of cold rolling of ultra thin strip	en_US
dc.type	Journal Article
utslib.citation.volume	9	en_US
utslib.citation.volume	209	en_US
utslib.for	0913 Mechanical Engineering	en_US
utslib.for	0910 Manufacturing Engineering	en_US
utslib.for	0912 Materials Engineering	en_US
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Mechanical and Mechatronic Engineering
utslib.copyright.status	closed_access
pubs.issue	9	en_US
pubs.publication-status	Published	en_US
pubs.volume	209	en_US

Abstract:

In this paper, the cold rolling experiments of ultra thin steel strip were carried out on an experimental rolling mill. The cold rolling of ultra thin strip with roll edge kiss was analysed theoretically, and the rolling force, intermediate force between the work roll and backup roll, the roll edge kiss force, the strip shape after rolling are obtained for this special rolling, and they are compared for various reduction and friction coefficients. Simulation results show that the reduction has a significant influence on the shape of rolled strip, and the calculated rolling forces and strip profile are consistent with the measured values. The effect of friction in the roll bite on cold rolling of ultra thin strip with roll edge kiss is also discussed. Surface characteristic was measured and it is shown that the steel surface roughness value reduces with an increase of reduction. © 2008 Elsevier B.V. All rights reserved.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/30761