Study on surface roughness and friction during hot rolling of stainless steel 301

Wei, D; Jiang, Z; Huang, J; Zhang, A; Shi, X; Jiao, S

Study on surface roughness and friction during hot rolling of stainless steel 301

Wei, D

Jiang, Z Huang, J Zhang, A Shi, X Jiao, S

Permalink

Publication Type:: Journal Article
Citation:: Advanced Materials Research, 2012, 500 pp. 403 - 409
Issue Date:: 2012-05-14

Closed Access

	Filename	Description	Size
	2013003159OK.pdf	Published version	2.31 MB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Wei, D https://orcid.org/0000-0002-4247-8905	en_US
dc.contributor.author	Jiang, Z	en_US
dc.contributor.author	Huang, J	en_US
dc.contributor.author	Zhang, A	en_US
dc.contributor.author	Shi, X	en_US
dc.contributor.author	Jiao, S	en_US
dc.date.issued	2012-05-14	en_US
dc.identifier.citation	Advanced Materials Research, 2012, 500 pp. 403 - 409	en_US
dc.identifier.isbn	9783037853993	en_US
dc.identifier.issn	1022-6680	en_US
dc.identifier.uri	http://hdl.handle.net/10453/32071
dc.description.abstract	A well-defined boundary condition is important for generating an accurate model for simulating metal forming process. It is important to characterize the features of the oxide scale in hot rolling of stainless steel strip. Short time oxidation tests in humid air with water vapor content of 7.0 vol. % were carried out using Gleeble 3500 thermo-mechanical simulator. The deformation, surface morphology of oxide scale, and the friction in hot rolling were studied by conducting hot rolling tests. The results show that the surface roughness decreases with an increase of reduction. The effect of oxide scale on friction and surface roughness transfer in hot rolling depends on oxide scale generated during reheating. When reheating time is increased, the average thickness of oxide scale increases and a relatively rough surface was obtained after hot rolling. Thick oxide scale of 301 steel shows the high lubricative effect. © (2012) Trans Tech Publications.	en_US
dc.relation.ispartof	Advanced Materials Research	en_US
dc.relation.isbasedon	10.4028/www.scientific.net/AMR.500.403	en_US
dc.title	Study on surface roughness and friction during hot rolling of stainless steel 301	en_US
dc.type	Journal Article
utslib.citation.volume	500	en_US
utslib.for	0910 Manufacturing Engineering	en_US
utslib.for	09 Engineering	en_US
dc.location.activity	Jinan, PEOPLES R CHINA
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Mechanical and Mechatronic Engineering
utslib.copyright.status	closed_access
pubs.publication-status	Published	en_US
pubs.volume	500	en_US

Abstract:

A well-defined boundary condition is important for generating an accurate model for simulating metal forming process. It is important to characterize the features of the oxide scale in hot rolling of stainless steel strip. Short time oxidation tests in humid air with water vapor content of 7.0 vol. % were carried out using Gleeble 3500 thermo-mechanical simulator. The deformation, surface morphology of oxide scale, and the friction in hot rolling were studied by conducting hot rolling tests. The results show that the surface roughness decreases with an increase of reduction. The effect of oxide scale on friction and surface roughness transfer in hot rolling depends on oxide scale generated during reheating. When reheating time is increased, the average thickness of oxide scale increases and a relatively rough surface was obtained after hot rolling. Thick oxide scale of 301 steel shows the high lubricative effect. © (2012) Trans Tech Publications.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/32071