Effect of surface texture on deformation behavior of asperity in cold metal forming

Wei, D; Jiang, Z; Lu, C; Tang, Y; Tieu, AK

Effect of surface texture on deformation behavior of asperity in cold metal forming

Wei, D

Jiang, Z Lu, C Tang, Y Tieu, AK

Permalink

Publication Type:: Conference Proceeding
Citation:: Advanced Materials Research, 2008, 32 pp. 185 - 188
Issue Date:: 2008-01-01

Closed Access

	Filename	Description	Size
	2013003176OK.pdf	Accepted Manuscript version	1.44 MB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Wei, D https://orcid.org/0000-0002-4247-8905	en_US
dc.contributor.author	Jiang, Z	en_US
dc.contributor.author	Lu, C	en_US
dc.contributor.author	Tang, Y	en_US
dc.contributor.author	Tieu, AK	en_US
dc.date.issued	2008-01-01	en_US
dc.identifier.citation	Advanced Materials Research, 2008, 32 pp. 185 - 188	en_US
dc.identifier.isbn	0878494758	en_US
dc.identifier.isbn	9780878494750	en_US
dc.identifier.issn	1022-6680	en_US
dc.identifier.uri	http://hdl.handle.net/10453/32087
dc.description.abstract	It was impossible to obtain the transverse friction along the strip width in most previous studies of cold strip rolling because the surface roughness lays were assumed to be vertical to the rolling direction. In this study, several types of oblique roughness textures were manufactured on aluminum samples and compression tests were carried out to obtain the effect of different textures on the deformation behavior of surface asperity. Different surface textures resulted in very different peak value of stress. It was found that stress was high and changed dramatically at the initial compression stage but tended to be stable when the total reduction increased. The asperity of which the top angle is 160° showed relatively high resistance to deformation.	en_US
dc.relation.ispartof	Advanced Materials Research	en_US
dc.relation.isbasedon	10.4028/0-87849-475-8.185	en_US
dc.title	Effect of surface texture on deformation behavior of asperity in cold metal forming	en_US
dc.type	Conference Proceeding
utslib.citation.volume	32	en_US
utslib.for	0912 Materials Engineering	en_US
utslib.for	09 Engineering	en_US
dc.location.activity	Brisbane, AUSTRALIA
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Mechanical and Mechatronic Engineering
utslib.copyright.status	closed_access
pubs.publication-status	Published	en_US
pubs.volume	32	en_US

Abstract:

It was impossible to obtain the transverse friction along the strip width in most previous studies of cold strip rolling because the surface roughness lays were assumed to be vertical to the rolling direction. In this study, several types of oblique roughness textures were manufactured on aluminum samples and compression tests were carried out to obtain the effect of different textures on the deformation behavior of surface asperity. Different surface textures resulted in very different peak value of stress. It was found that stress was high and changed dramatically at the initial compression stage but tended to be stable when the total reduction increased. The asperity of which the top angle is 160° showed relatively high resistance to deformation.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/32087