Finite element modelling of surface roughness transfer and oxide scale micro deformation in metal manufacturing process

Jiang, Z; Wei, D; Li, H

Finite element modelling of surface roughness transfer and oxide scale micro deformation in metal manufacturing process

Jiang, Z Wei, D

Li, H

Permalink

Publication Type:: Conference Proceeding
Citation:: AIP Conference Proceedings, 2013, 1532 pp. 254 - 261
Issue Date:: 2013-06-07

Open Access

Copyright Clearance Process

Recently Added
In Progress
Open Access

This item is open access.

Adobe PDF

Download Published versionAdobe PDF (510.43 kB)

View on publisher's site

View statistics

Full metadata record

Field	Value	Language
dc.contributor.author	Jiang, Z	en_US
dc.contributor.author	Wei, D https://orcid.org/0000-0002-4247-8905	en_US
dc.contributor.author	Li, H	en_US
dc.date.issued	2013-06-07	en_US
dc.identifier.citation	AIP Conference Proceedings, 2013, 1532 pp. 254 - 261	en_US
dc.identifier.isbn	9780735411562	en_US
dc.identifier.issn	0094-243X	en_US
dc.identifier.uri	http://hdl.handle.net/10453/32980
dc.description.abstract	In the paper, the micro deformation of oxide scale in hot strip rolling has been investigated with considering the friction effect. The finite element simulation of the micro deformation of oxide scale has been successfully conducted, and the calculated surface roughness is compared with the measured value, which shows a good agreement. A crystal plasticity finite element method (CPFEM) model was also successfully developed to analyse the surface roughness transfer during metal manufacturing. The simulation results show a good agreement with the experimental results in the flattening of surface asperity, and the surface roughness decreases significantly with an increase of reduction. This study also indicates that the lubrication can delay surface asperity flattening. © 2013 AIP Publishing LLC.	en_US
dc.relation.ispartof	AIP Conference Proceedings	en_US
dc.relation.isbasedon	10.1063/1.4806832	en_US
dc.title	Finite element modelling of surface roughness transfer and oxide scale micro deformation in metal manufacturing process	en_US
dc.type	Conference Proceeding
utslib.citation.volume	1532	en_US
utslib.for	0910 Manufacturing Engineering	en_US
dc.location.activity	Shenyang, PEOPLES R CHINA
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Mechanical and Mechatronic Engineering
utslib.copyright.status	open_access
pubs.publication-status	Published	en_US
pubs.volume	1532	en_US

Abstract:

In the paper, the micro deformation of oxide scale in hot strip rolling has been investigated with considering the friction effect. The finite element simulation of the micro deformation of oxide scale has been successfully conducted, and the calculated surface roughness is compared with the measured value, which shows a good agreement. A crystal plasticity finite element method (CPFEM) model was also successfully developed to analyse the surface roughness transfer during metal manufacturing. The simulation results show a good agreement with the experimental results in the flattening of surface asperity, and the surface roughness decreases significantly with an increase of reduction. This study also indicates that the lubrication can delay surface asperity flattening. © 2013 AIP Publishing LLC.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/32980