Typical lignocellulosic wastes and by-products for biosorption process in water and wastewater treatment: A critical review

Abdolali, A; Guo, WS; Ngo, HH; Chen, SS; Nguyen, NC; Tung, KL

Typical lignocellulosic wastes and by-products for biosorption process in water and wastewater treatment: A critical review

Abdolali, A Guo, WS

Ngo, HH

Chen, SS Nguyen, NC Tung, KL

Permalink

Publication Type:: Journal Article
Citation:: Bioresource Technology, 2014, 160 pp. 57 - 66
Issue Date:: 2014-01-01

Open Access

Copyright Clearance Process

Recently Added
In Progress
Open Access

This item is open access.

Adobe PDF

Download Accepted Manuscript VersionAdobe PDF (737.34 kB)

View on publisher's site

View statistics

Full metadata record

Field	Value	Language
dc.contributor.author	Abdolali, A	en_US
dc.contributor.author	Guo, WS https://orcid.org/0000-0001-5542-2858	en_US
dc.contributor.author	Ngo, HH https://orcid.org/0000-0002-0296-2866	en_US
dc.contributor.author	Chen, SS	en_US
dc.contributor.author	Nguyen, NC	en_US
dc.contributor.author	Tung, KL	en_US
dc.date.available	2020-05-25T19:06:41Z
dc.date.issued	2014-01-01	en_US
dc.identifier.citation	Bioresource Technology, 2014, 160 pp. 57 - 66	en_US
dc.identifier.issn	0960-8524	en_US
dc.identifier.uri	http://hdl.handle.net/10453/33355
dc.identifier.uri	http://hdl.handle.net/10453/37111
dc.description.abstract	Biosorption on lignocellulosic wastes and by-products has been identified as a proper alternative to the existing technologies applied for toxic metal ion and dye removal from wastewater streams. This paper deals with utilization of typical low cost wastes and by-products produced in different food agricultural and agro-industries as biosorbent and reviews the current state of studies on a wide variety of cheap biosorbents in natural and modified forms. The efficiency of each biosorbent has been also discussed with respect to the operating conditions (e.g. temperature, hydraulic residence time, initial metal concentration, biosorbent particle size and its dosage), chemical modification on sorption capacity and preparation methods, as well as thermodynamics and kinetics. © 2013 Elsevier Ltd.	en_US
dc.relation.ispartof	Bioresource Technology	en_US
dc.relation.isbasedon	10.1016/j.biortech.2013.12.037	en_US
dc.subject.classification	Biotechnology	en_US
dc.subject.mesh	Lignin	en_US
dc.subject.mesh	Water Pollutants, Chemical	en_US
dc.subject.mesh	Water Purification	en_US
dc.subject.mesh	Adsorption	en_US
dc.subject.mesh	Biodegradation, Environmental	en_US
dc.subject.mesh	Waste Water	en_US
dc.title	Typical lignocellulosic wastes and by-products for biosorption process in water and wastewater treatment: A critical review	en_US
dc.type	Journal Article
utslib.citation.volume	160	en_US
utslib.for	0904 Chemical Engineering	en_US
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Civil and Environmental Engineering
pubs.organisational-group	/University of Technology Sydney/Strength - CTWW - Centre for Technology in Water and Wastewater Treatment
pubs.organisational-group	/University of Technology Sydney/Students
utslib.copyright.status	open_access
pubs.publication-status	Published	en_US
pubs.volume	160	en_US

Abstract:

Biosorption on lignocellulosic wastes and by-products has been identified as a proper alternative to the existing technologies applied for toxic metal ion and dye removal from wastewater streams. This paper deals with utilization of typical low cost wastes and by-products produced in different food agricultural and agro-industries as biosorbent and reviews the current state of studies on a wide variety of cheap biosorbents in natural and modified forms. The efficiency of each biosorbent has been also discussed with respect to the operating conditions (e.g. temperature, hydraulic residence time, initial metal concentration, biosorbent particle size and its dosage), chemical modification on sorption capacity and preparation methods, as well as thermodynamics and kinetics. © 2013 Elsevier Ltd.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/33355