A comparison study on membrane fouling in a sponge-submerged membrane bioreactor and a conventional membrane bioreactor
- Publication Type:
- Journal Article
- Bioresource Technology, 2014, 165 pp. 69 - 74
- Issue Date:
Files in This Item:
|A comparison study on membrane fouling in a sponge SMBR.pdf||Published Version||320.17 kB|
|Accepted Manuscript Comparison SMBR and CMBR (BITE 13109).pdf||Accepted Manuscript Version||701.36 kB|
Copyright Clearance Process
- Recently Added
- In Progress
- Open Access
This item is open access.
The embargo period expires on 31 Aug 2016
This study compared membrane fouling in a sponge-submerged membrane bioreactor (SSMBR) and a conventional membrane bioreactor (CMBR) based on sludge properties when treating synthetic domestic wastewater. In the CMBR, soluble microbial products (SMP) in activated sludge were a major contributor for initial membrane fouling and presented higher concentration in membrane cake layer. Afterwards, membrane fouling was mainly governed by bound extracellular polymeric substances (EPS) in activated sludge, containing lower proteins but significantly higher polysaccharides. Sponge addition could prevent cake formation on membrane surface and pore blocking inside membrane, thereby alleviating membrane fouling. The SSMBR exhibited not only less growth of the biomass and filamentous bacteria, but also lower cake layer and pore blocking resistance due to lower bound EPS concentrations in activated sludge. Less membrane fouling in SSMBR were also attributed to larger particle size, higher zeta potential and relative hydrophobicity of sludge flocs.
Please use this identifier to cite or link to this item: