Phosphorus elimination from aqueous solution using 'zirconium loaded okara' as a biosorbent
- Publication Type:
- Journal Article
- Bioresource Technology, 2014, 170 pp. 30 - 37
- Issue Date:
Files in This Item:
|Phosphorus elimination from aqueous solution using 'zirconium loaded okara' (BITE 13714).pdf||Published Version||586.22 kB|
|Phosphorus elimination using 'zirconium loaded okara' (BITE 13714).pdf||Accepted Manuscript Version||418.85 kB|
Copyright Clearance Process
- Recently Added
- In Progress
- Open Access
This item is open access.
The embargo period expires on 24 Jul 2016
This work deals with the capture of phosphorus from aqueous solutions by biosorption onto zirconium loaded okara (ZLO). The batch-mode experiments were conducted to examine the effect of pH, biosorbent dose, initial phosphorus concentration, contact time, and temperature on the process. It was found that, the adsorption was most favored in the pH range of 2-6. The optimal doses for the adsorption, at initial phosphorus concentrations of 5, 10, 25, 50mg/L were 2, 3, 7, 10g/L, respectively. The maximum adsorption capacity of ZLO was approximately 44.13mg PO4/g at 298K. The phosphate removal was rapid, reaching 95% in 30min. Freundlich model best fitted the equilibrium data, while Pseudo-second order model satisfactorily described the kinetic results. Thermodynamic analysis revealed feasible, spontaneous, and endothermic nature of the process. The research would be beneficial for developing a promising, eco-friendly phosphorus biosorbent from a plentiful AWB - okara. © 2014 Elsevier Ltd.
Please use this identifier to cite or link to this item: