Removal of phosphorus by a high rate membrane adsorption hybrid system
- Publication Type:
- Journal Article
- Bioresource Technology, 2016, 201 pp. 365 - 369
- Issue Date:
Files in This Item:
|Removal of phosphorus by a high rate membrane adsorption hybrid system (BITE-D-15-05327).pdf||Accepted Manuscript Version||134.55 kB|
Copyright Clearance Process
- Recently Added
- In Progress
- Open Access
This item is open access.
The embargo period expires on 1 Feb 2018
© 2015 Elsevier Ltd Membrane adsorption hybrid system (MAHS) was evaluated for the removal of phosphate from a high rate membrane bioreactor (HR-MBR) effluent. The HR-MBR was operated at permeate flux of 30 L/m2 h. The results indicated that the HR-MBR could eliminate 93.1 ± 1.5% of DOC while removing less than 53% phosphate (PO4-P). Due to low phosphate removal by HR-MBR, a post-treatment of strong base anion exchange resin (Dowex∗21K-XLT), and zirconium (IV) hydroxide were used as adsorbent in MAHS for further removal of phosphate from HR-MBR effluent. It was found that the MAHS enabled to eliminate more than 85% of PO4-P from HR-MBR effluent. Hence, HR-MBR followed by MAHS lead to simultaneous removal of organics and phosphate in a reliable manner. The experiments were conducted only for a short period to investigate the efficiency of these resins/adsorbents on the removal of phosphorus and high rate MBR for organic removal.
Please use this identifier to cite or link to this item: