Thermal analysis of soft magnetic composite motors using a hybrid model with distributed heat sources

Guo, YG; Zhu, JG; Wu, W

Thermal analysis of soft magnetic composite motors using a hybrid model with distributed heat sources

Guo, YG

Zhu, JG

Wu, W

Permalink

Publication Type:: Journal Article
Citation:: IEEE Transactions on Magnetics, 2005, 41 (6), pp. 2124 - 2128
Issue Date:: 2005-06-01

Open Access

Copyright Clearance Process

Recently Added
In Progress
Open Access

This item is open access.

Adobe PDF

Download full textAdobe PDF (181.22 kB)

View on publisher's site

View statistics

Full metadata record

Field	Value	Language
dc.contributor.author	Guo, YG https://orcid.org/0000-0001-6182-0684	en_US
dc.contributor.author	Zhu, JG https://orcid.org/0000-0002-9763-4047	en_US
dc.contributor.author	Wu, W	en_US
dc.date.issued	2005-06-01	en_US
dc.identifier.citation	IEEE Transactions on Magnetics, 2005, 41 (6), pp. 2124 - 2128	en_US
dc.identifier.issn	0018-9464	en_US
dc.identifier.uri	http://hdl.handle.net/10453/5677
dc.description.abstract	This paper presents a hybrid thermal model with distributed heat sources for thermal analysis of soft magnetic composite (SMC) motors. The model uses a combination of lumped and distributed thermal parameters, which can be obtained from motor dimensions and thermal constants. The model can be used to calculate the core loss in each part, in combination with three-dimensional magnetic field finite-element analysis. The thermal model is applied to calculate the temperature distributions in a claw pole permanent-magnet motor with SMC stator. © 2005 IEEE.	en_US
dc.relation.ispartof	IEEE Transactions on Magnetics	en_US
dc.relation.isbasedon	10.1109/TMAG.2005.848316	en_US
dc.subject.classification	Applied Physics	en_US
dc.title	Thermal analysis of soft magnetic composite motors using a hybrid model with distributed heat sources	en_US
dc.type	Journal Article
utslib.citation.volume	6	en_US
utslib.citation.volume	41	en_US
utslib.for	090608 Renewable Power and Energy Systems Engineering (excl. Solar Cells)	en_US
utslib.for	090699 Electrical and Electronic Engineering not elsewhere classified	en_US
utslib.for	090607 Power and Energy Systems Engineering (excl. Renewable Power)	en_US
utslib.for	02 Physical Sciences	en_US
utslib.for	09 Engineering	en_US
dc.location.activity	UNIV SYDNEY, SYDNEY, AUSTRALIA
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
pubs.organisational-group	/University of Technology Sydney/Strength - CCET - Centre for Clean Energy Technology
utslib.copyright.status	open_access
pubs.issue	6	en_US
pubs.publication-status	Published	en_US
pubs.volume	41	en_US

Abstract:

This paper presents a hybrid thermal model with distributed heat sources for thermal analysis of soft magnetic composite (SMC) motors. The model uses a combination of lumped and distributed thermal parameters, which can be obtained from motor dimensions and thermal constants. The model can be used to calculate the core loss in each part, in combination with three-dimensional magnetic field finite-element analysis. The thermal model is applied to calculate the temperature distributions in a claw pole permanent-magnet motor with SMC stator. © 2005 IEEE.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/5677